Method and Application for Aeroengine Overall Unit NC Installation With Multi-axis Attitude Adjustment
GAO Hang1, SONG Qiang1, LIU Guo2, SHENG Xianjun3, ZHAO Zhe4
( 1. School of Mechanical Engineering, Dalian University of Technology, Dalian 116024, China;
2. AVIC Shenyang Aircraft Industrial (Group) Co., Ltd., Shenyang 110850, China;
3. School of Electrical Engineering, Dalian University of Technology, Dalian 116024, China;
4. AECC Shenyang Aeroengine Research Institute, Shenyang 110015, China)
Abstract:At present the installation of aeroengine overall unit to the aircraft body is mostly realized by manual work
with man-powered vehicle. To solve its defects of poor efficiency, high labor intensity, easy scratch of aeroengine and so
on, a kind of precise numerical-controlled (NC) installation method has been studied. An aeroengine NC installation vehicle
based on visual monitoring was developed. And the freedom of the multi-axis attitude adjusting platform in the vehicle was
analyzed. Experimental researches have been accomplished for the installation of aeroengine. Experimental results showed
that the method and the equipment for aeroengine NC installation had the superiority of convenient operation and high
visual degree. The efficiency of the installation for aeroengine was increased by more than one time with the location precision
being limited in 0.2mm and the attitude precision being limited in 20' . Meanwhile, the scratch between the aeroengine
edge and the engine cabin is avoided in the installation process.