[1] Jiang F L, Liu Z Q, Wan Y, et al. Analytical modeling and experimental investigation of tool and workpiece temperatures for interrupted cutting 1045 steel by inverse heat conduction method. Journal of Materials Processing Technology, 2013,213(6):887-894.
[2] Neugebauer R, Bouzakis K D, Denkena B, et al. Velocity effects in metal forming and machining processes. CIRP Annals - Manufacturing Technology, 2011, 60(2): 627-650.
[3] Cook M W, Bossom P K. Trends and recent developments in the material manufacture and cutting tool application of polycrystalline diamond and polycrystalline cubic boron nitride. International Journal of Refractory Metals and Hard Materials, 2000, 18(2): 147-152.
[4] Nabhani F. Wear mechanisms of ultra-hard cutting tools materials . Journal of Materials Processing Technology, 2001, 115(3): 402-412.
[5] Ai X, Liu Z Q. Developments of tool materials for high speed machining and their applications. Proceedings of Fifth Int Conf HSM, Metz,2006:883-894.
[6] Hovsepian P E, Luo Q, Robinson G, et al. TiAlN/VN superlattice structured PVD coatings: a new alternative in machining of aluminum alloys for aerospace and automotive components. Surface and Coatings Technology, 2006, 201(1): 265-272.
[7] Sumiya H, Uesaka S, Satoh S. Mechanical properties of high purity polycrystalline CBN synthesized by direct conversion sintering method. Journal of Materials Science, 2000, 35(5): 1181-1186.
[8] 赵军. 新型梯度功能陶瓷刀具材料的设计制造及其切削性能研究.北京:高等教育出版社, 2005.
[9] 曹同坤. 自润滑陶瓷刀具的设计开发及其自润滑机理研究[D]. 济南: 山东大学, 2005.
[10] 刘炳强. 原位生长晶须增韧氧化铝陶瓷刀具及切削性能研究[D]. 济南:山东大学,2007.
[11] 周咏辉, 艾兴, 赵军,等. Al2O3/(W,Ti)C纳米复合陶瓷材料的力学性能与强韧化机理. 山东大学学报(工学版), 2008, 38(1): 1-5.
[12] Klünsner T, Marsoner S, Ebner R, et al. Effect of microstructure on fatigue properties of WC-Co hard metals. Procedia Engineering, 2010, 2(1): 2001-2010.
[13] Wang C , Cheng K, Minton T, et al, Development of a novel surface acoustic wave (SAW) based smart cutting tool in machining hybrid dissimilar material. Manufacturing Letters, 2014(2):21-25.
[14] Sun X Z, Bateman R, Cheng K, et al. Design and analysis of an internally-cooled smart cutting tool for dry cutting. Proceedings of the IMechE, Part B: Journal of Engineering Manufacture, 2012(226): 585-591.