Abstract：Based on the mechanical model of bending deformation of the beam, a mathematical model for calculating the stiffness of the ventral plate of a single open rectangular groove cavity including a process convex platform is established. On the basis of this, the numerical calculation method is used to analyze the effect of the process convex table on the geometric center position of the groove and the stiffness of the groove center, and the effect of the size of the process convex table on the stiffness reinforcement. The calculation results show that when a process convex platform is set up in the center of the slot of the opening slot, the reinforcement stiffness of the groove edge is approximately linear with the width dimension of the process convex platform, and the reinforcement stiffness of the groove edge is very sensitive to the length size of the convex platform. With the reduction of the length of the convex platform, the stiffness reinforcement effect of the convex platform on the edge of the groove is very significant, and the stiffness enhancement effect of the convex platform on the geometric center of the ventral plate is almost negligible.
骆金威，易元，邱世广，刘元吉. 基于刚度补强的机加工艺凸台设计方法研究[J]. 航空制造技术, 2020, 63(4): 82-87.
LUO Jinwei, YI Yuan, QIU Shiguang, LIU Yuanji. Research on Design Method of Machining Process Convex Based on Stiff Reinforcement. Aeronautical Manufacturing Technology, 2020, 63(4): 82-87.
2020, 
