Study on Grinding Technology for Blade Surface of GH710 Blisk
XU Rufeng1, WANG Haining1, FU Yu2, YANG Shenliang3, LI Xun3
1. School of Mechanical Engineering, Shandong University of Technology, Zibo 255000, China;
2. AVIC Manufacturing Technology Institute, Beijing 100024, China;
3. School of Mechanical Engineering & Automation, Beihang University, Beijing 100191, China
GH710 is an important material with high strength, high temperature resistance and poor cutting performance, which make it difficult to guarantee the machining accuracy of blisk blade. According to the characteristics of GH710 blisk, CBN electroplated grinding wheel was presented. Precision grinding of GH710 blisk blade was realized based on optimization of grinding parameters and process, and verification tests were performed. The results show that the machining accuracy of GH710 blisk blade can be realized utilizing CBN electroplated grinding wheel and symmetrical plunge grinding, the profile error of blade surface is below 0.04mm and the requirement of wheel lifetime and grinding efficiency can be satisfied.
徐汝锋,王海宁,付余,杨慎亮,李勋. GH710整体叶盘叶片型面磨削加工技术研究[J]. 航空制造技术, 2019, 62(17): 73-80.
XU Rufeng, WANG Haining, FU Yu, YANG Shenliang, LI Xun. Study on Grinding Technology for Blade Surface of GH710 Blisk. Aeronautical Manufacturing Technology, 2019, 62(17): 73-80.