Research on Incremental Forming of H62 Copper Spiral Corrugated Tube
WANG Cheng1,2, YU Yaohui1,2, WANG Hui2,3, CHENG Xuan1,2, WEI Wenbin1,2, GUO Xunzhong1,2
1. College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;
2. Jiangsu Key Laboratory of Nuclear Energy Equipment Materials Engineering, Nanjing 210016, China;
3. College of Mechanical and Electronic Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
In order to study the forming method and forming limit of H62 copper spiral corrugated tubes, ABAQUS simulation and experimental research on tube incremental forming are carried out. For the first time, the spiral corrugated bellows are processed by the incremental tube forming method. Through the combination of simulation and test, the process parameters of the incremental forming of the tube are optimized, and the forming precision and forming limit of the H62 copper spiral corrugated tube were improved by theoretical analysis. The test results show that when the single feed of the tool head is 0.50mm, the spindle speed is 10r/min, and the axial feed speed of the tool head is 6.7mm/s, the thread depth limit is increased. When the thread depth is 2.5mm, the forming quality of the bellows is the best, and when the thread depth is more than 6mm, the forming quality is remarkably lowered.
基金资助:航空科学基金(2016ZE52047);江苏高校优势学科建设工程。
引用本文:
王成,余耀晖,王辉,程旋,魏文斌,郭训忠. H62铜螺旋波纹管增量成形研究[J]. 航空制造技术, 2019, 62(8): 98-102.
WANG Cheng, YU Yaohui, WANG Hui, CHENG Xuan, WEI Wenbin, GUO Xunzhong. Research on Incremental Forming of H62 Copper Spiral Corrugated Tube. Aeronautical Manufacturing Technology, 2019, 62(8): 98-102.