Recent Progress in Laser Peen Forming of Large Scale Panel
HU Zonghao1, LUO Mingsheng2, HU Yongxiang2, YAO Zhenqiang2
(1. AVIC Shenyang Aircraft Design & Research Institute, Shenyang 110035, China;
2. State Key Laboratory of Mechanical System and Vibration, School of Mechanical Engineering,
Shanghai Jiao Tong University, Shanghai 200240, China)
Laser peen forming (LPF) for large panel is a kind of deformation technology by inducing nonuniform plastic strain on surface using the laser-induced shock wave. The depth of plastic strain of LPF is five to ten times of the traditionalshot peening, hence it can be applied for the manufacture of large panel with high ribs and complex geometry. Thispaper presents a recent progress of LPF from following aspect: the mechanism of bending deformation of LPF, the shapecontrolling of LPF for complex geometry and the apparatuses developed for LPF. The background and research status quoare summarized, and the advises are given for the research of LPF. The most important for LPF of large panel is acquaintingthe bending mechanism and the process optimization and developing apparatus for LPF.
胡宗浩1,罗明生2,胡永祥2,姚振强2. 大型壁板激光喷丸成形技术研究与应用*[J]. 航空制造技术, 2017, 60(20): 43-48.
HU Zonghao1, LUO Mingsheng2, HU Yongxiang2, YAO Zhenqiang2. Recent Progress in Laser Peen Forming of Large Scale Panel. Aeronautical Manufacturing Technology, 2017, 60(20): 43-48.