Abstract:Advantages and disadvantages based on comprehensive analysis of the autoclave and vacuum assisted
resin infusion (VARI) have been discussed and synthesized. The new process combined autoclave with VARI has been developed.
The quality of product produced by the new process has been evaluated and compared with VARI, including fiber
volume fraction and thickness. The results show that the product manufactured by the new process present more excellent
mechanical properties and less porosity or resin enrichment. In addition, fiber volume fraction of the product by new process
can up to 60%. The longer holding time is, the higher the fiber volume fraction will be, until it reaches a certain value.
作者简介: 王召召硕士,从事树脂基复合材料相关研究,参与项目包括大型民用客机碳纤维复合材料典型部件液体成型技术研究项目与上汽集团R T M 与热压罐成型标准样条力学性能对比研究项目。
引用本文:
王召召,潘利剑,庄恒飞,段振锦,刘宇婷,胡秀凤. 热压罐/真空辅助组合工艺成型复合材料及其质量评价*[J]. 航空制造技术, 2016, 59(23/24): 78-81.
WANG Zhaozhao1,2, PAN Lijian2,3, ZHUANG Hengfei2, DUAN Zhenjin1,2, LIU Yuting2, HU Xiufeng2. Quality Estimation of Product Manufactured by the Autoclave/VARI Process. Aeronautical Manufacturing Technology, 2016, 59(23/24): 78-81.