数值模拟技术在热压罐工艺中的应用
徐鹏,晏冬秀,杨青,贾丽杰,魏冉,孙晶晶
上海飞机制造有限公司航空制造技术研究所,上海 200070)
Application of Numerical Simulation in the Autoclave Process
XU Peng, YAN Dongxiu, YANG Qing, JIA Lijie, WEI Ran, SUN Jingjing
(Aeronautical Manufacturing Technology Instititute, Shanghai Aircraft Manufacturing Co., Ltd., Shanghai 200070, China)
摘要 随着复合材料和计算机技术的发展,数值模拟技术在复合材料工艺仿真中的应用也日益明显。总结分析了数值模拟技术在复合材料热压罐工艺中的研究进展,包括热压罐内流场仿真、固化放热控制、固化变形预测,以及热隔膜成型过程仿真的应用前景。随着大数据和复合材料自动化、智能化的发展,发展数值模拟技术是大势所趋。
关键词 :
数值模拟 ,
热压罐工艺 ,
流场 ,
固化 ,
变形预测
Abstract :As the development of composite material and computer technology, the role of numerical simulation in production process becomes more and more important. The study progress of numerical simulation in autoclave process is summarized, including the flow field in the autoclave, controlling of curing heat, prediction of distortion by curing, as well as the simulation of hot drape forming. As the development of big data and the automation and intelligentization of composite,the development of numerical simulation is an irresistible trend.
Key words :
Numerical simulation
Autoclave process
Flow field
Cure
Prediction of distortion
作者简介 : 徐 鹏
工程师,博士,从事民用飞机复合材料研发,主要研究方向为碳纤维增强数值基复合材料工艺过程仿真技术研究、热固性复合材料热隔膜预成型工艺。
[1]
赵明伟,岳彩旭,陈志涛,张俊涛,刘献礼. 航空结构件铣削变形及其控制研究进展 [J]. 航空制造技术, 2022, 65(3): 108-117.
[2]
陈超越,殷宇豪,徐松哲,帅三三,胡涛,王江,任忠鸣. 航空发动机叶片用陶瓷型芯的光固化增材制造研究现状 [J]. 航空制造技术, 2022, 65(1/2): 67-76.
[3]
耿培皓,秦国梁. 线性摩擦焊接热力耦合行为及其研究现状 [J]. 航空制造技术, 2021, 64(7): 14-27.
[4]
蔡高参,符巨博,张东星,胡彪,辛艳喜. 热等静压技术在钨合金领域的应用研究进展 [J]. 航空制造技术, 2021, 64(23/24): 14-20.
[5]
李超,王仲奇,常正平,马健智. 基于 BP 神经网络和多目标粒子群算法的自动钻铆工艺参数优化方法 [J]. 航空制造技术, 2021, 64(23/24): 94-102.
[6]
田硕,高国强,钟李欣,陈福龙,曾元松,杨辉,尚建勤. 马鞍型带筋整体壁板喷丸成形数值模拟及优化 [J]. 航空制造技术, 2021, 64(17): 53-60/68.
[7]
徐琰,张臣,汪子轩. 局部近似平面 V 型沟槽减阻特性数值模拟研究 [J]. 航空制造技术, 2021, 64(15): 86-99.
[8]
孙辉. TC4 钛合金叶片喷丸数值模拟及喷丸路径规划 [J]. 航空制造技术, 2021, 64(14): 95-100.
[9]
张波,鲁泳,刘舒霆,刘强强,郝小忠. 大厚度复合材料分层自阻电热固化工艺设计研究 [J]. 航空制造技术, 2021, 64(11): 58-68.
[10]
沈艳,鲁泳,刘舒霆,郝小忠. 飞机复合材料构件固化度在线监测方法 [J]. 航空制造技术, 2021, 64(11): 76-85.
[11]
李登常,岳玉梅,姬书得,柴鹏,尚震. 无匙孔搅拌摩擦焊材料流动行为的研究 [J]. 航空制造技术, 2021, 64(10): 41-46/63.
[12]
官威,李文晓,戴瑛,贺鹏飞. 纺织复合材料预制体变形研究综述 [J]. 航空制造技术, 2021, 64(1/2): 22-37.
[13]
杨波,江晨,冯立杰,吴从焰,周思浩,张伟. 面向自动化物料传送的被动驱动托架设计与分析 [J]. 航空制造技术, 2021, 64(1/2): 94-98.
[14]
李晨,黄甲,陈程,高丽敏. 先进复合材料VARTM工艺树脂流动数值模拟研究 [J]. 航空制造技术, 2020, 63(5): 68-73.
[15]
刘宇,刘创业,马付建,杨大鹏,沙智华,黄文丽,张生芳. 基于内冲液的电火花小孔加工间隙流场仿真研究 [J]. 航空制造技术, 2020, 63(4): 36-42.