[1] Vickers G W,Quan K. Ball-mills versus end-mills for curved surface machining. ASME Journal of Engineering for Industry,1989,111(2): 22-26.
[2] Jensen C G,Anderson D C. Accurate tool placement and orientation for finished surface. Machining J. Design and Manufacture,1993,3: 251-261.
[3] Kruth J P,Klewais P. Optimization and dynamic adaptation of the cutter inclination during five-axis milling of sculptured surfaces. CIRP Annals,1994,43(1): 443-448.
[4] Lee Y S. Admissible tool orientation control of gouging avoidance for 5-axis complex surface machining. CAD Computer Aided Design,1997,29(7): 507-521.
[5] Warkentin A,Bedi S,Ismail F. Five-axis milling of spherical surfaces. International Journal of Machine Tools and Manufacture,1996,36(2): 229-243.
[6] Warkentin A,Ismail F,Bedi S. Multi-point tool positioning strategy for 5-axis mashining of sculptured surfaces. Computer Aided Geometric Design,2000,17(1): 83-100.
[7] 金曼,张俐,陈志同. 圆环面刀具五坐标加工端点误差控制刀位优化. 北京航空航天大学学报,2006,32(09): 1125-1128.
[8] Xu R,Chen Z,Chen W. Tool positioning algorithm based on the smooth tool path for 5-axis machining of sculptured surfaces. Chinese Journal of Mechanical Engineering,2011,5(24): 851-858.
[9] 陈志同,乐毅,徐汝锋. 中点误差控制宽行加工算法. 机械工程学报,2011,1(47): 117-123.
[10] 张敏,苏兰海,王君英.基于CAA的CATIA用户自定义特征创建.机械设计与制造,2008,9:87-88.
[11] 龙峰,樊留群.CATIA V5 二次开发技术初探. 淮阴工学院学报,2005,14(5):21-27.
[12] 潘爱民.COM原理与应用.北京:清华大学出版社,2000.
[13] 齐从谦,崔琼瑶. 基于参数化技术的设计方法研究. 机械设计与研究,2002,18(5):13-15.