|
|
|
| Research on Effect of the Construction of Outboard Wing Panel End#br#
on Plane Bearing Capacity |
| ZHAO Xiang1, ZHANG Nina3, ZHANG Junlong2 |
(1. Department of Engineering Mechanics, Northwestern Polytechnical University, Xi’an 710129, China;
2. The 41st Institute of NO.6 Academy China Aerospace Science & Industry CORP, Huhehaote 010010, China;
3. AVIC Xi’an Aircraft Industry Company Ltd., Xi’an 710089, China) |
|
|
|
Abstract The construction of outboard wing panel end has an important influence on stress-passing characteristic,
deformation and bearing capacity in the design of planes. In this paper, compression tests on three different construction
of the end are conducted to study the stress-passing characteristic, failure mode of them. The load shared by each screw is
computed by three dimensional finite element method, and the optimum construction is obtained by analyzing the effect of
bevel angle on the yield load.
|
|
|
|
|
|
|
|
|
2016, 
