[1] Yu H J，Zhou X G, Wang H L, et al. Mechanical properties of 3D KD-1 SiCf/SiC composites with engineered fibre-matrix interfaces. Composites Science and Technlgy, 2011, 71(5): 699-704.
[2] Wang H L, Zhou X G, Jin S Y, et al. Microstructure, mechanical properties and reaction mechanism of KD-1 SiCf/SiC composites fabricated by chemical vapor infiltration and vapor silicon infiltration . Materials Science and Engineering a-Structral Materials Properties Microstrcture and Processing，2011, 528(6): 2441-2445.
[3] Zhao S , Zhou X G,Yu J S,et al. Effect of heat treatment on microstructure and mechanical properties of PIP-SiC/SiC composites. Mater. Sci. Eng. A. 2013(599): 808-811.
[4] Yu H J. , Zhou X G, Zhang W, et al. Mechanical behavior of SiCf/SiC composites with alternating PyC/SiC multilayer interphases. Mater. Des. 2013(44): 320-324.
[5] Haug T ,Knale H . Processing, properties and structure development of polymer-derived fiber-reinforced SiC. J Am Ceram Soc, 1989 72(2): 104-110.
[6] Tanaka T, Tamari N, Kondo I, et al. Fabrication of three- dimensional tyranno fibre reinforced sic composite by the polymer precursor method . Ceramic International, 1998, 24(5): 365-370.
[7] Shin D W, Tanaka H. Low-temperature processing of ceramic woven fabric/ceramic matrix composites . Journal of the American Ceramic Society, 1994, 77(1): 97-104.
[8] Peuchert M, Vaaha T, Kohyama A, et al. Ceramics from organometallic polymers. Adv Mater, 1990, 2(9): 398-404.
[9] Kotani M, Inoue T, Kohyama A, et al. Effect of SiC particle dispersion on microstructure and mechanical properties of polymer-derived SiC/SiC composite. Materials Science and Engineering: A, 2003, 357(1-2): 376-385.
[10] Kotani M, Inoue T, Kohyama A, et al. Consolidation of polymer-derived SiC matrix composites: processing and microstructure. Composites Science and Technology, 2002, 62(16): 2179-2188.
[11] Kohyama A, Kotani M, Katkhy Y, et al. High-performance SiC/SiC composites by improved PIP processing with new precursor polymers. Journal of Nuclear Materials, 2000, 283-287: 565-569.
[12] Kotani M, Katoh Y, Kohyama A, et al. Fabrication and oxidation-resistance property of allylhydridopolycarbosilane-derived SiC/SiC composites. Journal of the Ceramic Society of Japan, 2003, 111: 300-307.
[13] Nannetti C A, Ortona A, Dario A, et al. Manufacturing SiC-fiber-reinforced SiC matrix composites by improved CVI/slurry infiltration/polymer impregnation and pyrolysis. Journal of the American Ceramic Society, 2004, 87(7):1205-1209.
[14] Dong S M, Katoh Y, Kohyama A, et al. Microstructural evolution and mechanical performances of SiCSiC composites by polymer impregnationmicrowave pyrolysis (PIMP) process. Ceramics International, 2002, 28:899-905.
[15] Wang Y Q,Cai S Y. Synthesis and Properies of a Liquid Polycarbosilane Containing Allyl Groups. Silicon Mater, 2010, 24(2): 85-88.
[16] Wang Y Q. Study on liquid SiC Ceramic Precursor with Si-H and –CH=CH2 active group[D]. Changsha:National University of Defense Technology, 2010.
2014, 
