[1] Masory O, Wang J, Zhuang H Q. On the accuracy of a stewart platform (Part 2): Kinematic calibration and compensation// Proceedings of the IEEE International Conference on Robotics and Automation.New York:IEEE, 1993:725-731.
[2] 黄田, 汪劲松, David J W,等. 并联构型装备几何参数可辨识性研究.机械工程学报,2002,38(S1):1-6.
[3] 裴葆青,罗学科,陈五一,等.6UPS并联机构静态误差的矢量法标定.中国机械工程,2006,17(8):854-857.
[4] 魏世民,周晓光,廖启征.六轴并联机床运动精度的标定研究.中国机械工程,2003,14(23):8-12.
[5] 彭斌彬,高峰.并联机器人的标定建模.机械工程学报,2005,41(8):132-135.
[6] 李新友,陈五一,韩先国.基于正交设计的3-RPS并联机构精度分析与综合.北京航空航天大学学报,2011 37 (8):979-984.
[7] Chen I M, Yang G L. Kinematic calibration of modular reconfigurable robots using product-of-exponentials formula. Journal of Robotic Systems,1997,14(11): 807-821.
[8] 韩先国, 陈五一,陈鼎昌, 基于路径跟踪原理求解6SPS并联机构位置正解. 北京航空航天大学学报, 2002(3): 370-372.
[9] Hong L, Cong M,Hong C. Error analysis of parallel manipulators based on differential operators// Proceedings of the 2009 IEEE International Conference on Mechatronics and Automation. Changchun:IEEE,2009.
[10] Arun K S, Huang T S, Blostein S D. Least-squares fitting of two 3-D point sets. IEEE Transactions on Pattern Analysis and Machine Intelligence, 1987,9(5): 698-700.