Wire and Arc Additive Manufacturing of Lightweight Metal Components in Aeronautics and Astronautics
LI Quan1,2, WANG Fude1, WANG Guoqing3, ZENG Xiaoyan2, LUO Zhiwei1, MA Cunqiang1, ZHANG Lei1
(1. Capital Aerospace Machinery Corporation Limited, Beijing 100076, China;
2. Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology,Wuhan 430074, China;
3. China Academy of Launch Vehicle Technology, Beijing 100076, China)
Light-weight integrated large components with high properties in aviation and aerospace industry are required to be manufactured efficiently and cheaply. Low cost and high deposition rate make wire and arc additive manufacturing (WAAM) a more suitable candidate for manufacturing the large scale and medium complexity parts, comparing with other 3D printing technologies. The development including the existing problems and feasible solution methods of aluminum and titanium WAAM technology is reviewed in this paper. The key technologies in the manufacturing large WAAM components, such as control of internal stress and strain, path planning and online monitoring, are also discussed.
李权1,2，王福德1，王国庆3，曾晓雁2，罗志伟1，马存强1，张磊1. 航空航天轻质金属材料电弧熔丝增材制造技术[J]. 航空制造技术, 2018, 61(3): 74-82.
LI Quan1,2, WANG Fude1, WANG Guoqing3, ZENG Xiaoyan2, LUO Zhiwei1, MA Cunqiang1, ZHANG Lei1. Wire and Arc Additive Manufacturing of Lightweight Metal Components in Aeronautics and Astronautics. Aeronautical Manufacturing Technology, 2018, 61(3): 74-82.
2018, 
