[1] Cable D. Imbedded fiber optic pressure and temperature sensors enable cure monitoring of pultruded composite materials//Conference on Effective Manufacturing Methods of Pultrusion. Mnahatten Beach:Society of Manufacturing Engineers, 1990:1-10.
[2] Smith G D. Modelling and experimental issues in the processing of composite laminates [D]. Vancouver, B.C. Canada: The University of British Columbia, 1992.
[3] Lynch K, Hubert P, Poursartip A. Use of a simple, inexpensive pressure sensor to measure hydrostatic resin pressure during processing of composite laminates.Polymer Composites, 1999, 20(4):581-593.
[4] 扎姆阿茹娜,张佐光,王科,等.复合材料热压成型过程用光纤压力测试技术.复合材料学报, 2004,21(1):45-50.
[5] 王科, 张佐光,扎姆阿如娜,等.光纤微弯压力测试系统实时监测复合材料热压成型过程.复合材料学报, 2005, 22(2):67-50.
[6] 汪赫男,张佐光,顾轶卓,等. 环氧复合材料层板热压成型孔隙缺陷影响因素.复合材料学报, 2007, 24(5):55-60.
[7] 徐骥威,李敏,顾轶卓,等.热固性树脂中孔隙形成条件的定量测试方法与影响因素.复合材料学报, 2008, 25(2):52-56.
[8] 常文,张佐光,顾轶卓,等. 热压成型环氧复合材料层板孔隙缺陷可控性//中国航空学会，中国工程院机械与运载工程学部.大型飞机关键技术高层论坛暨中国航空学会2007年学术年会，深圳:2007,2187-2192.
[9] 顾轶卓,张佐光,李敏.复合材料热压成型过程的树脂压力测试系统. 复合材料学报,2007,24(2):23-27.
[10] 张佐光,顾轶卓,李敏,等.一种适用于复合材料的热压成形过程的树脂压力采集系统：中国, 200610078827.X[P]. 2006-10-25.
[11] 孙凯,李敏,顾轶卓,等.热压罐零吸胶工艺树脂压力在线测试及其变化规律. 复合材料学报,2010，27(4):94-99.
[12] Xin C B, Gu Y Z, Li M, et al. Online monitoring and analysis of resin pressure inside composite laminate during zero-bleeding autoclave process.Polymer Composites, 2011, 32(2):314-323.
[13] Xin C B, Li M, Gu Y Z, et al. Study on the resin flow and fiber compaction of tapered composite laminates during autoclave processing.Journal of Reinforced Plastics and Composites, 2011, 30(16):1399-1411.
[14] Xin C B, Gu Y Z, Li M, et al. Experimental and numerical study on the effect of rubber mold configuration on the compaction of composite angle laminates during autoclave processing. Composites Part A: Applied Science and Manufacturing, 2011, 42(10):1353-1360.
[15] 李艳霞. 先进复合材料热压流动/压缩行为数值模拟与工艺质量分析[D]. 北京: 北京航空航天大学, 2008.
[16] Wang X M, Xie F y, Li M, et al. Influence of tool assembly schemes and integral molding technologies on compaction of T-stiffened skins in autoclave process. Journal of Reinforced Plastics and Composites, 2009, 17(5):273-280.
[17] 刘小龙,顾轶卓,李敏,等.复合材料热压罐工艺中基于Flexiforce传感器的压力测试系统. 复合材料学报,2013,30(5):67-73.
2015, 
