Abstract：According to the feature of TC1 titanium alloy cover part, the processing property of the part is analyzed.
The influence of some factors such as mould material, temperature, blank holder gap and drawing rate on the drawing formability
of TC1 titanium alloy cover part are discussed, meanwhile the appropriate parameters are optimized. The results
indicate that the proposed technological method is feasible for the integral forming of thin-walled TC1 titanium alloy with
large drawing ratios. Moreover, parts with high quality of flatness can be successfully formed by using air-demoulding
method. It provides a technical reference for picking off the similar parts.
引用本文:
张 志1,2,3，李鹏亮1,2,3， 孙 宾1,2,3，李均红4. TC1 钛合金端盖零件热拉深成形工艺研究[J]. 航空制造技术, 2017, 60(8): 79-83.
ZHANG Zhi1,2,3，LI Pengliang1,2,3，SUN Bin1,2,3，LI Junhong4. Study on Thermal Deep-Drawing Process of TC1 Titanium Alloy Cover Part. Aeronautical Manufacturing Technology, 2017, 60(8): 79-83.
2017, 
