[1] Bariani P F, Bruschi S, Ghiotti A, et al. Testing formability in the hot stamping of HSS. Annals of the CIPP, 2008(57): 265-268.
[2] Geiger M, Merklein M, Hoff C. Basic investigation on the hot stamping steel 22MnB5// Proceedings of The Sheet Metal 2005 Conference, 2005 : 795-802.
[3] Arnda L G, Ravier P, Chastel Y. Hot stamping of quenchable steels // Proceedings of the IDDRG 2003 , 2003 :164-166.
[4] Hoffmann H, So H, Steinbelss H. Design of hot stamping tools with cooling system. Annals of the CIPP, 2007, 56(1): 262-272.
[5] Lorenz D, Roll K. Modeling and analysis of integrated hot forming and quenching processes//Proceedings of the Sheet Metal 2005 Conference, 2005 : 787-794.
[6] Mori K, Maki S, Tanaka Y. Warm and hot stamping of ultra high strength steel sheets using resistance heating. Annals of the CIRP, 2005, 54(1): 209-212.
[7] Akerstrom P, Oldenburg M. Studies of the thermo-mechanical material response of a boron steel by inverse modeling. J. Phys. IV France, 2004 (120): 625-633.
[8] Akerstrom P, Wikman B, Oldenburg M. Material parameter estimation for boron steel from simultaneous cooling and compression experiment. Modeling and Simulation in Materials Science and Engineering, 2005 (13): 1291-1308.
[9] Turetta A, Bruschi S, Ghiotti A. Investigation of 22MnB5 formability in hot stamping operations.Journal of Material Processing Technology, 2006 (177): 396-400.
[10] 林建平,王立影,田浩彬,等. 超高强度钢板热冲压成形研究与进展.热加工工艺,2008, 37(21): 140-144.
[11] 林建平,孙国华,朱巧红,等. 超高强度钢板热成形板料温度的解析模型研究. 锻压技术,2009, 34(1): 20-23.
[12] Lin Jianping, Wang Liying, Tian Habin, et al. Research on the hot stamping process of quenchable ultrahigh strength Steel// Proceedings of the 2007 International Conference on Advances in Construction Machinery and Vehicle Engineering,2007: 179-183.
[13] 《有色金属及其热处理》编写组. 有色金属及其热处理. 北京:国防工业出版社,1993: 27-28.
[14] 张新明,刘玲,贾寓真. 拉伸与轧制预变性对2519A铝合金组织与力学性能的影响. 中国有色金属学报,2010, 20(6): 1088-1094.