[1] Abrão A M, Faria P E, Campos R J C, et al. Drilling of fiber reinforced plastics: A review. Journal of Materials Processing Technology, 2007, 186(1): 1-7.
[2] Khashaba U. Drilling of polymer matrix composites: A review. Journal of Composite Materials, 2013, 47(15): 1817-1832.
[3] Kumar D, Singh K K. An approach towards damage free machining of CFRP and GFRP composite material: a review. Advanced Composite Materials, 2014(ahead-of-print): 1-15.
[4] 简龙艺, 林有希.碳纤维复合材料铣削加工研究进展.工具技术, 2014, 48(4): 3-6.
[5] Wang X, Kwon P Y, Schrock D, et al. Friction coefficient and sliding wear of AlTiN coating under various lubrication conditions. Wear, 2013, 304(1-2): 67-76.
[6] Wang X, Kwon P Y, Sturtevant C, et al. Tool wear of coated drills in drilling CFRP. Journal of Manufacturing Processes, 2013, 15(1): 127-135.
[7] Hintze W, Hartmann D, Schütte C. Occurrence and propagation of delamination during the machining of carbon fibre reinforced plastics (CFRPs) — An experimental study. Composites Science and Technology, 2011, 71(15): 1719-1726.
[8] Wang X, Zhang L C. An experimental investigation into the orthogonal cutting of unidirectional fibre reinforced plastics. International Journal of Machine Tools and Manufacture, 2003, 43(10): 1015-1022.
[9] Pecat O, Rentsch R, Brinksmeier E. Influence of milling process parameters on the surface integrity of CFRP. Procedia CIRP, 2012, 1: 466-470.
[10] Schorník V, Daňa M, Zetková I. the influence of the cutting conditions on the machined surface quality when the CFRP is machined. Procedia Engineering, 2015, 100: 1270-1276.
[11] Karpat Y, Bahtiyar O, Değer B. Mechanistic force modeling for milling of unidirectional carbon fiber reinforced polymer laminates. International Journal of Machine Tools and Manufacture, 2012, 56: 79-93.
[12] Karpat Y, Polat N. Mechanistic force modeling for milling of carbon fiber reinforced polymers with double helix tools. CIRP Annals - Manufacturing Technology, 2013, 62(1): 95-98.
[13] 明伟伟,王昌赢, 魏莹莹, 等.纤维增强复合材料制孔刀具技术研究进展.航空制造技术, 2013 (14): 34-37.
[14] Han S, Chen Y, Xu J, et al. Experimental study of tool wear in milling multidirectional CFRP laminates. Materials Science Forum, 2014, 770: 276-280.
[15] De Lacalle N L, Lamikiz A, Campa F J, et al. Desing and test of a multitooth tool for CFRP milling. Journal of Composite Materials, 2009, 43(26): 3275-3290.
[16] Hosokawa A, Hirose N, Ueda T, et al. High-quality machining of CFRP with high helix end mill. CIRP Annals - Manufacturing Technology, 2014, 63(1): 89-92.
[17] Haddad M, Zitoune R, Eyma F, et al. Study of the surface defects and dust generated during trimming of CFRP: Influence of tool geometry, machining parameters and cutting speed range. Composites Part A: Applied Science and Manufacturing, 2014, 66: 142-154.
[18] Sheikh-Ahmad J Y. Machining of polymer composites. New York: Springer, 2009:143-235.
[19] 周井文, 陈燕, 傅玉灿, 等.进给速度对不同纤维方向CFRP铣削表面形貌的影响.复合材料学报, 2015, 32(2): 370-377.
[20] Geis T, Klingelhöller C, Hintze W. Constant depth scoring of fibre reinforced plastic structures to prevent delamination. Procedia CIRP, 2014, 14: 205-210.
[21] Nor Khairusshima M K, Che Hassan C H, Jaharah A G, et al. Effect of chilled air on tool wear and workpiece quality during milling of carbon fibre-reinforced plastic. Wear, 2013, 302(1-2):