[1] 李双江.304奥氏体不锈钢夹杂物的冶金行为.东北大学学报（自然科学版），2010,31(3)： 402-405.
[2] 李永泰.压力容器分析设计需讨论的问题.压力容器，2007，24(2): 46-47.
[3]Kanazawa, Miller K J, Brown M W. Low-cycle fatigue under out-of-phase loading conditions. Trans. ASME J. Engng Mater.Tech.,1977,99:222-228.
[4]丁剑，张荻，西田信一.应力控制条件下奥氏体不锈钢的低周疲劳性能.金属学报，2002，38(12)： 1261-1265.
[5] Sergiy S, Oleksandr Z, Timophiy P. Multiaxial Low Cycle Fatigue Life Prediction Criteria: Comparisons and Results. Transactions of the 17th International Conference on Structural Mechanics in Reactor Technology (SMIRT 17), 2003.
[6] 陈传尧.疲劳与断裂.武汉：华中科技大学出版社.2001.
[7] 徐瀛.疲劳强度.北京：高等教育出版社.1988.
[8] 魏楠，金尧，孙训芳.低周循环应力-应变关系与损伤.机械强度，2002，24(3):426-428.
[9] Bela I Sandor. Fundamentals of cycle stress and strain. Beijing: Science Press, 1985.
[10] Yao C, Liang G, Zhang Q. Research on curves of cyclic stress-strain and definition of fracture life. Proc. of lst. National Conf. on Metal Fatigue, Beijing:Metallurgy Industry Press, 1984.
[11] Wang B, Fan J, Yang Q. Experimental research on material behavior of cyclic hardening and softening In Fatigue and Fracture, Beijing:Aviation Industry Press, 1998.
[12] Hassan T, Kyriakides S. Ratcheting of Cyclically Hardening and Softening Material: Part I: Uniaxial Behavior. Beijing:International Journal of Plasticity,1994, 10:149-184.
[13] 刘忠侠，宋谋胜，李继文,等.A356合金钢的低周疲劳行为及塑性应变能.中国有色金属学报，2006,12(6)： 260-267.
[14] 朱杰武,许雁,葛利玲,等.1.4 %C 超高碳钢显微组织与疲劳性能的研究.材料热处理学报，2004,25(3):30-34.
[15] 张亚军.10CrNiMo高强钢的低周疲劳特性.北京科技大学学报，2011,1(1): 22-28.
[16] 钟群鹏，赵子华.断口学.北京：高等教育出版社，2006.
2013, 
