|
|
国内外关于Glare的研究和应用 |
熊晓枫,张庆茂 |
中航工业成都飞机设计研究所 |
|
[1] Alderliesten R C, Homan J J. Fatigue and damage tolerance issues of glare in aircraft structures. International Journal of Fatigue, 28(2006):1116-1123.
[2] Roebroeks G H J J. Towards GLARE-The Development of a Fatigue Insensitive and Damage Tolerant Aircraft Material[D], Delft: Delft University of Technology, 1991.
[3] Vlot A, Gunnink J M. Fibre metal laminates, an introduction.Kluwer Academic Publishers, 2001.
[4] Wu G C, Yang J M. The Mechanical Behaviour of GLARE Laminates for Aircraft Structures. Jonrnal of the Minerals. Metals and Materials, 2005(57): 72-73.
[5] Wu G C, Mechanical behavior, damage tolerance and durability of fiber metal laminates for aircraft structures[D]. California: University of California, 2005.
[6] Plokker H M. crack closure in GLARE[D]. Delft: Delft University of Technology, 2005.
[7] Toi R. An empirical crack growth model for fiber/metal laminates. Proceedings of the 18th Symposium of the International Committee on Aeronautical Fatigue, Melbourne, Australia, 1995.
[8] Homan J J. Fatigue initiation in fibre metal laminates. International Journal of Fatigue, 2006(28): 366-374.
[9] Cox B N. Life prediction for bridged fatigue cracks, Life Prediction Methodology for Titanium Matrix Composites. ASTM STP 1253,W.S.Johnson, J.M.Larsen, B.N.Cox, Eds. ASTM,552-572(1996).
[10] Takamatsu T, Shimokawa T, Matsumura T. Evaluation of fatigue crack growth behavior of GLARE3 fiber/metal laminates using compliance method. Engineering Fracture Mechanics, 2003(70):2603-2616.
[11] Guo Y J, Wu X R. A theoretical model for predicting fatigue crack growth rates in fibre-reinforced metal laminates. Fatigue & Fracture of Engineering Materials & Structures, 1998(21):1133-1145.
[12] Guo Y J, Wu X R. Bridging stress distribution in center-cracked fiber reinforced metal laminates: modeling and experiment. Engineering Fracture Mechanics, 1999(63):147-163.
[13] Alderliesten R C. Fatigue crack growth and delamination growth in glare[D]. Delft: Delft University of Technology, 2005.
[14] Shim D J, Alderliesten R C, Spearing S M. Fatigue crack growth prediction in GLARE hybrid laminates. Composite Science and Technology, 2003(63):1759-1767.
[15] Lapczyk I, Juan A. Hurtado. Progressive damage modeling in fiber-reinforced materials. Composites: Part A,2007(38):2333-2341.
[16] Chang P Y, Yang J M, Modeling of fatigue crack growth in notched fiber metal laminates. International Journal of Fatigue, 2008(23):2165-2174.
[17] 顾志芬,崔德渝. 纤维铝合金胶接层板残余应力分布. 复合材料学报,1995,12(1):75-80.
[18] Gegory M A. Proceedings of the 30th Annual CIM Conference of Metallurgists (Ottawa, Cannada: CIM), 1991.
[19] 廖建,曹增强,代瑛,等. GLARE层板偏轴拉伸性能. 塑性工程学报,2007,14(5):67-70.
[20] 黄侠,袁红璇,蔡呜豪. GLARE层板复合材料零件成形与装配技术浅析. 航空制造技术,2010(6):92-95.
[21] 王帅. 空客A380先进GLARE复合材料蒙皮无损检测方案设计. 科协论坛,2010(9):78-79.
[22] 姜舜,赵耀. 纤维金属混杂层板拉伸强度分析. 船舶科学技术, 2011,33(5):33-37.
[23] 张嘉振,白世刚,周振功. 拉-压加载下纤维增强铝合金层板疲劳裂纹扩展的压载荷效应与预测模型. 复合材料学报,2012,29(4):163-169.
[24] 郭亚军,吴学仁. 纤维-金属胶结层板的桥接应力与应力强度因子研究. 材料工程, 1996(6):22-26.
[25] 郭亚军,吴学仁. 纤维金属层板疲劳裂纹扩展速率与寿命预测的唯象模型. 航空学报,1998,19(3):275-283.
[26] 郭亚军,郑瑞琪. 变幅载荷下纤维金属层板的疲劳与寿命预测. 中国工程科学, 1999,1(3):35-40.
[27] Vašek A, Polák J, Kozák V. Fatigue crack initiation in fibre-mental laminate GLARE2. Materials Science and Engineering, 1997: A234-236.
[28] Laurent F. NDT on A380. Presentation for the 48th Annual NDT Forum. Orlando, 2005.
[29] 梁中全,薛元德. GLAER层板的力学性能及其在A380客机上的应用. 玻璃钢/复合材料, 2005,49(4):49-51.
[30] Yeh J R. Fracture Mechanics of delamination in arall laminates. Engineering Fracture mechanics, 1988(30): 827-837.
|
[1] |
李林. 大尺寸复合材料翼梁数字化设计/制造技术[J]. 航空制造技术, 2019, 62(4): 39-46. |
[2] |
贾东升,高彤,唐磊,许英杰. 热压罐成型复合材料所用框架式模具热弹性耦合优化设计[J]. 航空制造技术, 2019, 62(21): 79-82. |
[3] |
吕 毅1, 张 伟2. 复合材料加筋壁板制造成本的快速估算模型*[J]. 航空制造技术, 2017, 60(6): 84-87. |
[4] |
朱继宏,何 飞,张卫红. 面向增材制造的飞行器结构优化设计关键问题*[J]. 航空制造技术, 2017, 60(5): 16-21. |
[5] |
顾 超,黄 俊,杨凤田. 电动通用飞机复合材料结构设计及验证技术[J]. 航空制造技术, 2017, 60(13): 93-99. |
[6] |
贺旭东,明伟伟,景璐璐,安庆龙,陈 明. 高效加工刀具技术研究现状及发展趋势*[J]. 航空制造技术, 2016, 59(7): 55-59. |
[7] |
王松杰, 张国庆, 赵腾伦, 王 燕. 结构设计辅助指导系统的实现[J]. 航空制造技术, 2016, 59(3): 93-96. |
[8] |
宋袁曾,陈 洁,毛 景. 大型飞机整机涂装自动化实施探讨与展望*[J]. 航空制造技术, 2016, 59(10): 52-56. |
[9] |
宋利康,廖建华,郑堂介,张建东,朱永国. 大飞机铝锂合金等直段研制关键技术[J]. 航空制造技术, 2015, 58(4): 82-85. |
[10] |
黄瑞. 超塑成形/扩散连接结构设计及试验研究[J]. 航空制造技术, 2015, 58(17): 59-61. |
[11] |
孙银宝,陈娟,杨军. 基于MBD复合材料结构设计与表达技术[J]. 航空制造技术, 2015, 58(14): 87-89. |
[12] |
王荣桥,胡殿印,申秀丽,樊江. 航空发动机典型结构概率设计技术[J]. 航空制造技术, 2014, 57(7): 26-30. |
[13] |
张亚君,殷小玮,张立同,成来飞. 吸波型SiC陶瓷材料的研究进展[J]. 航空制造技术, 2014, 57(6): 113-118. |
[14] |
胡海阳. 面向飞机数字化装配的结构设计技术[J]. 航空制造技术, 2013, 56(6): 96-97. |
[15] |
小城. 结构设计技术专家王向明[J]. 航空制造技术, 2013, 56(20): 30-31. |
|
|
|
|