作者简介: 西北工业大学材料学院副教授,博士,主要研究方向为电弧增材制造技术、固相连接理论及技术、固-固界面演变热力学等,相关研究成果发表于Acta Materialia,Scripta Materialia,Materials Science and Engineering A等国际著名期刊,国际著名期刊Journal of Alloys and Compound审稿人。
[1] 卢秉恒, 李涤尘. 增材制造(3D打印) 技术发展. 机械制造与自动化, 2013(4): 1-4.
[2] 刘大响, 金捷, 彭友梅,等. 大型飞机发动机的发展现状和关键技术分析, 航空动力学报, 2008, 23(6): 976-980.
[3] 李涤尘, 贺健康, 田小永,等. 增材制造:实现宏微结构一体化制造. 机械工程学报, 2013, 49(6): 129-135.
[4] WANG F , WILLIAMS S, RUSH M. Morphology investigation on direct current pulsed gas tungsten arc welded additive layer manufactured Ti-6Al-4V alloy. The International Journal of Advanced Manufacturing Technology, 2011:57(5):597-603.
[5] WANG H, KOVACEVIC R. Variable polarity GTAW in rapid prototyping of aluminum parts//Proceedings of the 11th Annual Solid Freeform Fabrication Symposium. Austin, TX. 2000: 369-376.
[6] OUYANG J H, WANG H, KOVACEVIC R. Rapid prototyping of 5356-aluminum alloy based on variable polarity gas tungsten arc welding: process control and microstructure. Materials and Manufacturing Processes, 2002, 17(1): 103-124.
[7] WANG H, KOVACEVIC R. Rapid prototyping based on variable polarity gas tungsten arc welding for a 5356 aluminium alloy. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 2001,215: 1519-1527.
[8] MUSCATO G, SPAMPINATO G, CANTELLI L. A closed loop welding controller for a rapid manufacturing process. IEEE, 2008:1080-1083.
[9] CHARLES C, JÄRVSTRÅT N. Modelling Ti-6Al-4V microstructure by evolution laws implemented as finite element subroutines: Application to TIG metal deposition. 2009:477-485.
[10] CHARLES C, JÄRVSTRÅT N. Finite element modelling of microstructure on GTAW metal deposition of Ti-6Al-4V alloy//Proceedings of 16th International Conference & Mathematical Modelling and Information Technologies in Welding and Related Processes, 2006.
[11] CHARLES C, JÄRVSTRÅT N. Development of a microstructure model for metal deposition of titanium alloy Ti-6Al-4V. 2007:1201-1205.
[12] BAUFELD B, BIEST O, GAULT R. Microstructure of Ti-6Al-4V specimens produced by shaped metal deposition. International Journal of Materials Research, 2009, 100(11): 1536-1542.
[13] BAUFELD B, BIEST O. Mechanical properties of Ti-6Al-4V specimens produced by shaped metal deposition. Science and Technology of Advanced Materials, 2009, 10(1):1-10.
[14] BAUFELD B, BIEST O, GAULT R, et al. Manufacturing Ti-6Al-4V components by shaped metal deposition: microstructure and mechanical properties//Proceedings of Trends in Aerospace Manufacturing 2009 International Conference, 2009.
[15] BAUFELD B, BRANDL E, BIEST O. Wire based additive layer manufacturing: comparison of microstructure and mechanical properties of Ti-6AL-4V components fabricated by laser-beam deposition and shaped metal deposition. Journal of Materials Processing Technology, 2011,211(6): 1146–1158.
[16] BAUFELD B, BIEST O, Gault R. Additive manufacturing of Ti-6Al-4V components by shaped metal deposition: microstructure and mechanical properties. Materials & Design, 2010,31: 106-111.
[17] KAZANAS P , DEHERKAR P, ALMEIDA P, et al. Fabrication of geometrical features using wire and arc additive manufacture. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2012, 226(6): 1042-1051.
[18] CLARK D, BACHE M R, WHITTAKER M T. Shaped metal deposition of a nickel alloy for aero engine applications. Journal of Materials Processing Technology, 2008, 203(1-3):439-448.
[19] 彭善德, 刘顺洪, 丁冬平, 等. 机器人堆焊快速成型的实验研究. 电焊机, 2006, 36(3): 33-36.
[20] MARTINA F, MEHNEN J, WILLIAMS S W, et al. Investigation of the benefits of plasma deposition for the additive layer manufacture of Ti–6Al–4V. Journal of Materials Processing Technology, 2012, 212(6):1377-1386.
[21] SPENCER J D, DICKENS P M, WYKES C M. Rapid prototyping of metal parts by three-dimensional welding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 1998, 212(3): 175-182.
[22] KWAK Y M, DOUMANIDIS C. Geometry regulation of material deposition in near net shape manufacturing by thermally scanned welding. Journal of Manufacturing Processes, 2002, 4(1):28-41.
[23] DOUMANIDIS C, KWAK Y M. Geometry modeling and control by infrared and laser sensing in thermal manufacturing science and engineering. Journal of Manufacturing Science and Engineering, 2001, 123: 45-52.
[24] DOUMANIDIS C, KWAK Y M. Multivariable adaptive control of the bead profile geometry in gas metal arc welding with thermal scanning. International Journal of Pressure Vessels and Piping, 2002, 79: 251-262.
[25] 熊俊. 多层单道GMA增材制造成形特性及熔敷尺寸精确控制[D]. 哈尔滨:哈尔滨工业大学,2014.
[26] ALMEIDA P M S, WILLIAMS S. Innovative process model of Ti-6Al-4V additive layer manufacturing using cold metal transfer (CMT)// Solid Freefrom Fabrication Symposium, 2010.
[27] DING J, COLEGROVE P, MEHNEN J, et al. Thermo-mechanical analysis of wire and arc additive layer manufacturing process on large multi-layer parts. Computational Materials Science, 2011,50: 3315–3322.
[28] WANG F, WILLIAMS S, COLEGROVE P. Microstructure and mechanical properties of wire and arc additive manufactured Ti-6Al-4V. Metallurgical and Materials Transactions A, 2013,44A: 968-977.