The adhesive thickness is very important to the bonding strength of the stiffened panel. Taking fourbar T-shaped stringer stiffened panel as the object, measure the springback of T-shaped stringer by tri-ordinate measuring machine, observe the bonding section and measure the adhesive thickness of the panel by sectioning, to explore several influencing factors, including springback deformation, flange width and edge chamfer of the T-shaped stringer on adhesive thickness. Meantime, simulate the springback and the flange deformation of T-shape stringer by finite element software ABAQUS. The result shows that the springback is 0.4°–0.5°, which has a significant effect on the adhesive thickness. The thickness of adhesive layer from the stringer edge to web changes from thick to thin when flange width is 22 mm. The thickness of adhesive layer from the stringer edge to web changes from thin to thick and then to thin when flange width is 73 mm. The adhesive thickness can be improved by edge chamfer, avoiding sudden change of adhesive thickness because of skin wrinkle, and then improve bonding quality. During part manufacturing, the adhesive thickness can be significantly improved by controlling the above factors to ensure the bonding strength of the parts.
闫超,林德志,刘钧天,刘婉玥,吕芳萱. T型长桁加筋壁板胶层厚度的影响因素研究[J]. 航空制造技术, 2023, 66(22): 92-98.
YAN Chao, LIN Dezhi, LIU Juntian, LIU Wanyue, Lü Fangxuan. Study on Influencing Factors of Adhesive Thickness of T-Shaped Stringer Stiffened Panel[J]. Aeronautical Manufacturing Technology, 2023, 66(22): 92-98.