A Review on Thermo-Forming Process and Simulation Progresses of Continuous Fibre Reinforced Thermoplastic Plastics
CHEN Hongda1, 2, CAO Dongfeng2, HU Haixiao2, 3, WANG Jihui4, DING Anxin4, ZHONG Yucheng3, NI Aiqing1, JI Yundong4, CHEN Junlei4
1. State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China;
2. Foshan Xianhu Laboratory of Advanced Energy Science and Technology Guangdong Laboratory, Foshan 528000, China;
3. School of Science, Wuhan University of Technology, Wuhan 430070, China;
4. School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China
Continuous fibre reinforced thermoplastic plastics (CoFRTP) exhibit the advantages of fast manufacturing, high fracture toughness and high recyclability, which are promising materials for aerospace and automotive industries. Thermoforming process is one of the most promising way for CoFRTP forming since the advantages of high efficiency and low cost. However, due to the amount of forming parameters involved in this process and the complex coupling of factors such as large nonlinearity deformation and multi phase transformation of materials, defects like wrinkles, fiber cracking and excessive dimensional deformation are prone to be induced, which generate great challenges to the mechanical properties of components and the assembly property. In order to overcome the disadvantages of low efficiency and high cost of traditional trial and error methods and improve the efficiency of thermoforming process design, this paper focuses on the review of thermoforming process and numerical methods. This paper includes four parts: the application and manufacturing of CoFRTP, the analysis and research status of thermoforming process, the simulation method of thermoforming process as well as the conclusion and the outlook of thermoforming technology. This study will provide theoretical guidance for highly efficient and high quality forming of CoFRTP, and promote the corresponding structural design and engineering application as well.
陈宏达,曹东风,胡海晓,王继辉,丁安心,钟愉承,倪爱清,冀运东,陈俊磊. 连续纤维增强热塑性复合材料热压成型工艺研究进展[J]. 航空制造技术, 2023, 66(15): 24-37.
CHEN Hongda, CAO Dongfeng, HU Haixiao, WANG Jihui, DING Anxin, ZHONG Yucheng, NI Aiqing, JI Yundong, CHEN Junlei. A Review on Thermo-Forming Process and Simulation Progresses of Continuous Fibre Reinforced Thermoplastic Plastics[J]. Aeronautical Manufacturing Technology, 2023, 66(15): 24-37.