(1. Assembly Center, AVIC General Huanan Aircraft Industry Co., Ltd., Zhuhai 519040, China; 2. Business Planning and Project Department, AVIC General Huanan Aircraft Industry Co., Ltd., Zhuhai 519040, China)
Abstract：This paper aims at the problem of the attitude adjustment and the high-strength eccentric hole processing during docking of the wing and fuselage, the tail and fuselage of the large amphibious aircraft. Based on the hole drilling technology of automatic feed drilling, a technological test plan for the machining of high-strength eccentric holes for aircraft docking was designed. Then determining the technological parameters of machining high-strength eccentric holes by automatic feed drilling. At the same time, the aircraft wing body attitude is analyzed through the laser tracker to ensure the docking of the wing and fuselage, the tail and fuselage of the large amphibious aircraft and meet the requirements.
杨新良，张学振，温端画，陈健. 大型水陆两栖飞机翼身对接偏心孔精加工工艺研究与应用[J]. 航空制造技术, 2020, 63(20): 104-111.
YANG Xinliang,ZHANG Xuezhen,WEN Duanhua,CHEN Jian. Research and Application of Finishing Technology for Eccentric Hole of Wing Body of Large Amphibious Aircraft. Aeronautical Manufacturing Technology, 2020, 63(20): 104-111.
2020, 
