Effect of Welding Process on Fiber Laser Welding of 2A97T3 Al-Li Alloy
YI Zhen1,2, CHEN Li 2, HE Enguang 2, CHANG Ming 1
( 1. School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China;
2. Science and Technology on Power Beam Processes Laboratory, AVIC Manufacturing Technology Institute,
Beijing 100024, China )
Abstract：Effects of the welding process on fiber laser welding of 1.2mm 2A97T3 Al-Li alloy are studied through
a lot experiments. The results show that with the increase of the welding heat input, the welding bead width and the backtop
width ratio will be improved. Moreover, the variation of the back side bead width is significant, while the top side bead
width has small changes. Too much heat input will lead to decrease of welding bead width due to the collapse of welding
seam. The welding process parameters will be much more narrow when laser power and welding speed increasing. Under
the condition of the same welding linear energy, welding forming of high speed is better. The hardness of laser thermal conducting
welding is obviously higher than that of laser deep penetration welding.
易 珍1，2，陈 俐2，何恩光2，常 明1. 工艺参数对2A97T3 铝锂合金光纤激光焊接焊缝成形的影响[J]. 航空制造技术, 2017, 60(13): 66-71.
YI Zhen1,2, CHEN Li 2, HE Enguang 2, CHANG Ming 1. Effect of Welding Process on Fiber Laser Welding of 2A97T3 Al-Li Alloy. Aeronautical Manufacturing Technology, 2017, 60(13): 66-71.
2017, 
