喷丸强化对表面完整性影响的研究现状与发展
盖鹏涛1,2,3 ,陈福龙1,2,3 ,尚建勤1,2,3 ,韩秀全1,2,3
1. 中航工业北京航空制造工程研究所,北京100024;
2. 塑性成形技术航空科技重点实验室,北京 100024;
3. 数字化塑性成形技术与装备北京市重点实验室,北京 100024
Recent Situation and Development Trend of Shot Peening on Surface Integrity
GAI Pengtao1,2,3, CHEN Fulong1,2,3, SHANG Jianqin1,2,3, HAN Xiuquan1,2,3
(1. AVIC Beijing Aeronautical Manufacturing Technology Research Institute, Beijing 100024, China;
2. Aeronautical Key Laboratory for Plastic Forming Techbology, Beijing 100024,China;
3. Beijing Key Laboratory of Digital Plasticity Forming Technology and Equipment, Beijing 100024, China)
摘要 综述了喷丸强化技术对材料表层残余应力分布、显微组织结构、表面粗糙度和表层硬度分布等表面完整性因素影响的研究进展,阐述了不同喷丸强化技术与材料表面完整性因素间的关系以及基于表面完整性调控的喷丸强化技术的发展趋势。
关键词 :
喷丸强化 ,
表面完整性 ,
残余应力 ,
显微组织结构 ,
表面粗糙度 ,
表层硬度
Abstract :Shot peening is a kind of efficient, economical and effective surface peening technology and can improve
mechanical performance of material remarkably through controlling surface integrity of peened material. The influence of
shot peening on surface integrity are summarized, such as residual stress, microstructure, roughness and hardness and the
relationship is introduced between different kinds of shot peening technologies and surface integrity in this paper. The future
development prospects of shot peening research based on surface integrity control are summed up.
Key words :
Shot peening
Surface integrity
Residual stress
Microstructure
Roughness
Hardness
作者简介 : 盖鹏涛
中航工业北京航空制造工程研究所金属成形技术研究室高级工程师,主要从事先进材料制备及成形技术、表面强化技术和表面完整性的研究。
引用本文:
盖鹏涛,陈福龙,尚建勤,韩秀全. 喷丸强化对表面完整性影响的研究现状与发展[J]. 航空制造技术, 2016, 59(20): 16-21.
GAI Pengtao1,2,3, CHEN Fulong1,2,3, SHANG Jianqin1,2,3, HAN Xiuquan1,2,3. Recent Situation and Development Trend of Shot Peening on Surface Integrity. Aeronautical Manufacturing Technology, 2016, 59(20): 16-21.
链接本文:
http://www.amte.net.cn/CN/10.16080/j.issn1671-833x.2016.20.016 或 http://www.amte.net.cn/CN/Y2016/V59/I20/16
[1]
范文涛,陈燕,陈逸佳,谢松峰,季珺杰,纪道航. CFRP 铣削加工三维形貌研究 [J]. 航空制造技术, 2021, 64(9): 62-67.
[2]
姜廷宇,王洋,王鹏,万志城,张全利,苏宏华. TB6 钛合金孔二次挤压残余应力及疲劳寿命仿真研究 [J]. 航空制造技术, 2021, 64(9): 77-84.
[3]
马泳涛,翟林邦,朱泽华,张永宾,刘兰荣,马胜钢. 水射流表层改性技术研究进展 [J]. 航空制造技术, 2021, 64(7): 28-35.
[4]
王亚霁,孙玉利,墨洪磊,袁航,朱力敏,陆波,郭凌曦. 单晶硅透镜铣磨工艺参数优化研究 [J]. 航空制造技术, 2021, 64(7): 90-94.
[5]
黄小康,任绪凯,陈华斌,王浩,陈小奇. 高温合金机器人柔性磨削表面完整性研究进展 [J]. 航空制造技术, 2021, 64(7): 38-52.
[6]
王科昌,易鹏,朱烨均,丁文锋. 镍基高温合金K4125磨削性能与参数优化研究 [J]. 航空制造技术, 2021, 64(7): 81-87.
[7]
李蕊芝,周香林,孙澄川,谢晨,温薇 . 微粒子喷丸技术研究进展 [J]. 航空制造技术, 2021, 64(6): 82-87/95.
[8]
刘晓彤,王丙阳,戴宁,武立铭,王敬钊,胡全栋,李怀学. 激光选区熔化制备钛合金点阵材料无损表征 [J]. 航空制造技术, 2021, 64(5): 24-29.
[9]
李本凯,丁文锋,马艳艳,肖红,黄庆飞,司文元,杨嘉 . 新型刚玉砂轮磨削GH4169镍基高温合金的性能评价研究 [J]. 航空制造技术, 2021, 64(4): 14-19.
[10]
刘适,马飞,褚福舜. 基于 TRIZ 的飞机大型结构件加工适应性装夹设计 [J]. 航空制造技术, 2021, 64(21): 90-95.
[11]
朱慧宁,马小刚,程海东,陈燕,韩冰. 磁针磁力研磨工艺对发动机涡轮叶片表面质量的试验研究 [J]. 航空制造技术, 2021, 64(18): 62-68.
[12]
宋伟伟,黄云,肖贵坚,宋沙雨,张友栋. TC17 钛合金砂带磨削表面形貌形成及其预测研究 [J]. 航空制造技术, 2021, 64(14): 56-62.
[13]
孙辉. TC4 钛合金叶片喷丸数值模拟及喷丸路径规划 [J]. 航空制造技术, 2021, 64(14): 95-100.
[14]
朱卫华,王宗园,周金华,路超凡. 面向残余应力控制的高温合金铣削刀具几何参数优化方法 [J]. 航空制造技术, 2021, 64(14): 79-86.
[15]
吴帮福,丁文锋,曹洋. 颗粒增强钛基复材轴向超声振动辅助磨削试验研究 [J]. 航空制造技术, 2021, 64(11): 96-102.