[1] SANTOS E C, SHIOMI M, OSAKADA K, et al. Rapid manufacturing of metal components by laser forming[J]. Int. J. Mach. Tools Manuf., 2006, 46(12/13):1459-1468.
[2] DUTTA MAJUMDAR J, PINKERTON A, Liu Z, et al. Microstructure characterisation and process optimization of laser assisted rapid fabrication of 316L stainless steel[J]. Appl. Surf. Sci., 2005, 247: 320-327.
[3] GU D D, SHEN Y F. Balling phenomena during direct laser sintering of multi-component Cu-based metal powder[J]. Alloy Compd., 2007, 432(1/2):163-166.
[4] KRUTH J P, FROYEN L, VAN VAERENBERGH J, et al. Selective laser melting of iron-based powder[J]. Journal of Materials Processing Technology, 2004, 149(1-3):616-622.
[5] MORGAN R, SUTCLIFFE C J, NEILL W O. Density analysis of direct metal laser re-melted 316L stainless steel cubic primitives[J]. Journal of Materials Science, 2004, 39:1195-1205.
[6] LI R D, LIU J H, SHI Y S, et al. Balling behavior of stainless steel and nickel powder during selective laser melting process[J]. International Journal of Advanced Manufacturing Technology, 2012, 59(9-12):1025-1035.
[7] MERCELIS P, KRUTH J P. Residual stresses in selective laser sintering and selective laser melting[J]. Rapid Prototyping Journal, 2006, 12(5):254-265.
[8] 王迪,杨永强,黄延禄,等. 层间扫描策略对SLM直接成型金属零件质量的影响[J]. 激光技术, 2010, 34(4):447-451.
WANG D, YANG Y Q, HUANG Y L, et al. Impact of inter-layer scan strategy on quality of direct fabrication metal parts in SLM process [J]. Laser Technology, 2010, 34(4):447-451.
[9] THIJS L, VERHAEGHE F, CRAEGHS T, et al. A study of the microstructural evolution during selective laser melting of Ti-6Al-4V[J]. Acta Materialia, 2010, 58:3303-3312.