[1] Ezugwu E O, Bonney J, Yamane Y. An overview of the machinability of aeroengine alloys. Journal of Materials Processing Technology, 2003, 134(2): 233-253.
[2] Ezugwu E O, Wang Z M, Machado A R. The machinability of nickel-based alloys: a review. Journal of Materials Processing Technology, 1999, 86:1-16.
[3] 师昌绪.中国高温合金40年.北京:中国科学技术出版社,1996.
[4] 于启勋.难加工材料的切削技术.机械工艺师,1994(1): 6-8.
[5] Rashid R A R, Sun S, Palanisamy S, et al. A study on laser assisted machining of Ti10V2Fe3Al alloy with varying laser power. Journal of Advanced Manufacturing Technology, 2014, 74:219-224.
[6] Braham-Bouchnak T, Germain G, Morel A J, et al. The influence of laser assistance on the machinability of the titanium alloy Ti555-3. Journal of Advanced Manufacturing Technology, 2013, 68:2471-2481.
[7] 陈五一, 袁跃峰. 钛合金切削加工技术研究进展. 航空制造技术, 2010(15): 26-30.
[8] 徐九华, 刘鹏, 傅玉灿. 超硬刀具高速切削钛合金研究进展. 航空制造技术, 2011(14): 26-30.
[9] El-Gallab M , Sklad M. Machining of Al/SiC particulate metal-matrix composites Part I: Tool performance. Journal of Materials Processing Technology, 1998, 83(1-3): 151-158.
[10] Manna A, Bhattacharayya B. A study on machinability of Al/SiC-MMC. Journal of Materials Processing Technology, 2003,140(1-3): 711-716.
[11] 袁哲俊, 李建广. 金属切削与先进制造技术的新进展.机械工人, 2000(3): 3-4.
[12] Hung N P, Boey F Y C , Khor K A. Machinability of cast and powder-formed aluminum alloys reinfored with sic particles. Journal of Materials Processing Technology, 1995, 48(1-4): 291-297.
[13] 吴雪峰, 王扬. 激光加热辅助切削技术及研究进展. 哈尔滨理工大学学报, 2012, 17(4): 34-45.
[14] Patten J A, Jacob J. Comparison between numerical simulations and experiments for single point diamond turning of single crystal silicon carbide. Journal of Manufacturing Processes, 2008, 10: 28-33.
[15] Samant A N, Dahotre N B. Laser machining of structural ceramics—a review. Journal of the European Ceramic Society, 2009, 29(6): 969-993.
[16] Chang C W, Kuo C P. An investigation of laser-assisted machining of Al2O3 ceramics planing. International Journal of Machine Tools and Manufacture, 2007, 47(3-4): 452-461.
[17] Tian Y,Shin Y C.Laser-assisted burnishing of metals. International Journal of Machine Tools and Manufacture, 2007, 47(1): 14-22.
[18] Rozzi J C, Pfefferkorn F E, Incropera F P, et al. Transient, three-dimensional heat transfer model for the laser assisted machining of silicon nitride: I. Comparison of predictions with measured surface temperature histories. International Journal of Heat and Mass Transfer, 2000, 43(8): 1409-1424.
[19] Ding H, Shin Y C. Laser-assisted machining of hardened steel parts with surface integrity analysis. International Journal of Machine Tools and Manufacture, 2010, 50(1): 106-114.
[20] 王扬, 马丽心, 谢大纲, 等.陶瓷材料激光加热辅助切削温度场分析. 哈尔滨工业大学学报, 2001, 33 (6): 785-788.
[21] 鄢锉, 李力钧, 金湘中,等. Al2O3热压陶瓷激光辅助切削温度场分布与切削深度. 中国有色金属学报, 2008, 18(2) : 254-259.
[22] Zaeh M F, Wiedenmann R, Daub R. A thermal simulation model for laser-assisted milling. Physics Procedia, 2010, 5: 353-362.
[23] Samant A N, Dahotre N B. Laser machining of structural ceramics—a review. Journal of the European Ceramic Society, 2009, 29(6): 969-993.
[24] Lei S, Shin Y C, Incropera F P. Deformation mechanisms and constitutive modeling for silicon nitride undergoing laser-assisted machining. International Journal of Machine Tools and Manufacture, 2000, 40(15): 2213-2233.
[25] Brecher C, Rosen C J, Emonts M. Laser-assisted milling of advanced materials. Physics Procedia, 2010, 5: 259-272.
[26] Rozzi J C, Pfefferkorn F E, Shin Y C, et al. Experimental evaluation of the laser assisted machining of silicon nitride ceramics. Journal of Manufacturing Science and Engineering, 2000, 122(4): 666-670.
[27] Rebro P A, Shin Y C, Incropera F P. Laser-assisted machining of reaction sintered mullite ceramics. Journal of Manufacturing Science and Engineering, 2002, 124(4): 875-885.
[28] Pfefferkorn F E, Shin Y C, Tian Y, et al. Laser-assisted machining of magnesia-partially-stabilized zirconia. Journal of Manufacturing Science and Engineering, 2004, 126(1): 42-51.
[29] 吴雪峰, 王扬, 张宏志. 激光加热辅助切削氮化硅陶瓷实验研究. 宇航学报, 2010(5): 1457-1462.
[30] 鄢锉.激光加热辅助切削Al2O3工程陶瓷理论与试验研究[D]. 长沙:湖南大学, 2008.
[31] Kong X J, Yang L J, Zhang H Z, et al. Cutting performance and coated tool wear mechanisms in laser-assisted milling K24 nickel-based superalloy. The International Journal of Advanced Manufacturing Technology, 2015, 77: 2151-2163.
[32] Anderson M, Patwa R, Shin Y C. Laser-assisted machining of Inconel 718 with an economic analysis. International Journal of Machine Tools and Manufacture,2006, 46(14):1879-1891.
[33] Rajagopal S, Plankenhorn D J, Hill V L. Machining aerospace alloys with the aid of a 15 kW laser. Journal of Applied Metalworking, 1982, 2(3): 170-184.
[34] Novak J W, Shin Y C, Incropera F P. Assessment of plasma enhanced machining for improved machinability of Inconel 718. Journal of Manufacturing Science and Engineering, 1997, 119(1): 125-129.
[35] Novak J W . Plasma enhanced machining of difficult to manufacture materials[D]. West Lafayette: Purdue University, 1995.
[36] Leshock C E, Kim J N, Shin Y C. Plasma enhanced machining of Inconel 718: modeling of workpiece temperature with plasma heating and experimental results. International Journal of Machine Tools and Manufacture, 2001, 41(6): 877-897.
[37] Boyer R R. An overview on the use of titanium in the aerospace industry. Materials Science and Engineering: A, 1996, 213(1): 103-114.
[38] Ezugwu E O, Wang Z M. Titanium alloys and their machinability—a review. Journal of Materials Processing Technology, 1997, 68(3): 262-274.
[39] Dandekar C R, Shin Y C, Barnes J. Machinability improvement of titanium alloy (Ti-6Al-4V) via LAM and hybrid machining. International Journal of Machine Tools and Manufacture, 2010,50(2):174-182.
[40] Sun S, Harris J, Brandt M. Parametric investigation of laser-assisted machining of commercially pure titanium. Advanced Engineering Materials, 2008, 10(6): 565-572.
[41] Wiedenmann R, Liebl S, Zaeh M F. Influencing factors and workpiece's microstructure in laser-assisted milling of titanium. Physics Procedia, 2012, 39: 265-276.
[42] 马丽心, 王扬, 谢大纲, 等. 冷硬铸铁激光加热辅助切削实验研究. 哈尔滨工业大学学报, 2002, 34(2): 228-231.
[43] Skvarenina S, Shin Y C. Laser-assisted machining of compacted graphite iron. International Journal of Machine Tools and Manufacture, 2006, 46(1): 7-17.
[44] Demitrescu P, Koshy P, Stenekes J, et al. High-power diode laser assisted hard turning of AISI D2 tool steel. International Journal of Machine Tools and Manufacture, 2006, 46(1): 7-17, 2006, 46(15): 2009-2016.
[45] Wang Y, Yang L J, Wang N J. An investigation of laser assisted machining of Al2O3 particle reinforced aluminum matrix composite. Journal of Materials Processing Technology, 2002, 129(1-3):268-272.
[46] Dandekar C R, Shin Y C. Laser-assisted machining of a fiber reinforced Al-2%Cu metal matrix composite. Journal of Manufacturing Science and Engineering, 2010, 132 (2): 061004.
[47] Dandekar C R, Shin Y C. Experimental evaluation of laser-assisted machining of silicon carbide particle-reinforced aluminum matrix composites. The International Journal of Advanced Manufacturing Technology, 2013,66: 1603-1610.
[48] Bejjani R, Shi B, Attia H, et al Laser assisted turning of titanium metal matrix composite. CIRP Annals - Manufacturing Technology, 2011, 60: 61-64.
[49] Komanduri R, Von Turkovich B F. New observations on the mechanism of chip formation when machining titanium alloys. Wear, 1981, 69(2): 179-188. |