[1] Carlos B，Goni A A，Azpilicueta P B，et al. Study and selection of the most appropriate filler materials for an Cu/Al brazing joint in cooling circuitsMater. Materials and Manufacturing Processes，2011(26): 236-41.
[2] Di Z，Hu S S，Shen J Q，et al. Intermediate layer characterization and fracture behavior of laser-welded copper/aluminum metal joints. Materials and Design，2014(58): 357-362.
[3] Ji F，Xue S B，Dai W. Effects of Ti on the brazability of Zn-22Al-xTi filler metals as well as properties of Cu/Al brazing Joints. Rare Metal Materials and Engineering，2013(42): 2453-2457.
[4] Koyoma K, Shinozaki K J，Ikeda Kenji，et al. Evaluation of brazing properties using Al-Si-Mg-Bi brazing alloy. Development of Brazing Technique for Al-Cu Dissimilar Joint(Part1). Journal of Light Metal Welding and Construction，2002(40): 403-410.
[5] Yan X Q，Liu S X，Long W M，et al. Stress corrosion crack of ZnAl15 alloys in hot and humid environment. Materials Letters，2013(93):183-186.
[6] 张满，薛松柏，姬峰，等. CuAl2相对铜铝钎焊接头组织与性能的影响. 焊接学报，2011，2(2): 93-96.
[7] Yong X，Ji H J，Li M Y，et al. Ultrasound-assisted brazing of Cu/Al dissimilar metals using a Zn-3Al filler metal. Materials and Design，2013(52): 740-747.
[8] 张启运，庄鸿寿. 钎焊手册. 北京: 机械工业出版社，2008.
[9] 羊浩，杨文静，黄继华，等. 铝/铝钎焊用Al-Si-Zn系钎料的研究. 焊接，2014(5): 31-35.
[10] 张启运，庄鸿寿. 三元合金相图手册. 北京: 机械工业出版社，2011.
[11] 张满，薛松柏，戴玮，等. Al元素含量对Zn-Al钎料性能的影响. 焊接学报，2010，31(9): 93-96.
[12] Huang M L，Kang N，Zhou Q，et al. Effect of Ni content on mechanical properties and corrosion behavior of Al/Sn-9Zn-xNi/Cu Joints. Journal of Materials Science and Technology，2012(28): 844-852.
2015, 
