[1]许国康.大型飞机自动化装配技术.航空学报,2008,29(3):734-740.
[2]刘连喜,李西宁,王仲奇,等.无头铆钉自动钻铆工艺试验研究. 西北工业大学学报, 2013(01):77-82.
[3]干涉配合铆接实验小组.干涉配合铆接的疲劳试验[J].西北工业大学学报, 1975(01):57-61.
[4]《航空制造工程手册》总编委会.航空制造工程手册(飞机装配分册). 北京:航空工业出版社,2010.
[5]Li Y J. An analysis of riveting process by theoretical, nonlinear finite element and experimental methods[D]. Wichita: Wichita State University, 1998.
[6]Shishkin S S. Computation of the contact load in a rivet bond. Journal of Machinery Manufacture and Reliability, 2010, 39(1): 43-46.
[7] Blanchot V, Daidie A. Riveted assembly modelling: Study and numerical characterisation of a riveting process. Journal of Materials Processing Technology, 2006, 180(1-3):201–209.
[8]夏平,刘兰.铆接铆钉分布压力的计算[J].现代制造工程, 2003 (12): 99-101.
[9]刘平.铆接变形及其有限元分析[D]. 西安: 西北工业大学,2011.
[10]吴森.干涉配合紧固件孔的弹塑性工程分析. 南京航空学院学报, 1990,22 (4): 17-24.
[11]吴森. 铆接干涉配合紧固件孔的弹塑性分析及其在疲劳寿命估算中的应用. 航空学报, 1989,10 (12): 662-665.
[12]Li G, Shi G, Bellinger N C. Study of the Residual Strain in Lap Joints. Journal of Aircraft, 2006.43(4):1145-1151.
[13] Li G, Shi G, Bellinger N C. Studies of Residual Stress in Single-Row Countersunk Riveted Lap Joints [J]. Journal of Aircraft, 2006. 43(3):592-599.
[14] Li G, Shi G. Effect of the Riveting Process on the Residual Stress in Fuselage Lap Joints. Canadian Aeronautics and Space Journal, 2004. 50(2):91-105.
[15] Li G, Shi G, Bellinger N C. Effects of Fastener Clearance Fit And Friction Coefficient on the Stress Condition in Triple-Row Riveted Lap Joints[C]. Orlando: 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference18th, 2010:, 1-24.
[16]Wronicz W, Kaniowski J, Korzeniewski B, et al. Experimental and Numerical Study of Stress and Strain Field around the Rivet. Springer: ICAF 2011 Structural Integrity:Influence of Efficiency and Green Imperatives, 2011:277-288.
[17] Atre A, Johnson W S. Analysis of the Effects of Interference and Sealant on Riveted Lap Joints. Journal of aircraft, 2007, 44(2):353—364.
[18] Baha II S, Hesebeck O, IFAM F. Simulation of the Solid Rivet Installation Process. SAE Int. J. of Aerosp, 2010.3(1):187-197
[19] Rijck J J M, Homan J J, Schijve J, et al. The driven rivet head dimensions as an indication of the fatigue performance of aircraft lap joints.International Journal of Fatigue,2007, 29(12):2208–2218.
[20] Cheraghi S H. Effect of variations in the riveting process on the quality of riveted joints. International Journal of Advanced Manufacturing Technology, 2008, 39:1144-1155.
[21] Kelly B, Costello C. FEA modeling of setting and mechanical testing of aluminum blind rivets. Journal of Material Processing Technology, 2004, 153-154:74-79.
[22]Chen N J, Ducloux R, pecquet C, et al. Numerical and experimental studies of the riveting process. International Journal of Material Forming, 2011, 4(1):45-54.
[23]Zhang K F, Cheng H, Li Y. Riveting Process Modeling and Simulating for Deformation Analysis of Aircraft’s Thin-walled Sheet-metal Parts.Chinese Journal of Aeronautics, 2011, 24:369-377.
[24]牟伟强,李原,张开富,等.无头铆钉压铆力数学建模与仿真分析.西北工业大学学报, 2010,28(5): 742-747.
[25]宋丹龙,李原,骆彬,等.CFRP/Al复合构件无头铆钉压铆力建模与仿真分析.西北工业大学学报,2012,30(04): 558-564.
[26] Markiewicz E, Langrand B, Ddletombe E, et al., Analysis of the riveting process forming mechanisms. Int. J. of Materials and Product Technology, 1998, 13:123-145.
[27] Bedair O. Stress field characteristics of eccentrically loaded aircraft spliced joints. Applied Mathematical Modelling, 2012. 36(10):4543-4556.
[28]Aman F, Cheraghi S H, Krishnan K K, et al. Study of the impact of riveting sequence, rivet pitch, and gap between sheets on the quality of riveted lap joints using finite element method. International Journal of Advanced Manufacturing Technology, 2013,67:545–562.
[29] Bi Y B, Yan W M, Ke Y L. Numerical study on predicting and correcting assembly deformation of a large fuselage panel during digital assembly.Assembly Automation, 2014, 34(2):204–216.
[30]Xiao H, Li Y, Zhang K F, et al. Multi-objective Optimization Method for Automatic Drilling and Riveting Sequence Planning [J]. Chinese Journal of Aeronautics, 2010. 23(6):734-742.
[31]Hua Wang. Riveting Sequence Study of Horizontal Stabilizer Assembly Using Finite-Element Analysis and Riveting Equivalent Unit. Journal of Aerospace Engineering, 2014, 04014040:1-8.
[32]Muller R P. An experimental and analytical investigation on the fatigue behavior of fuselage riveted lap joints[D]. Delft: Delft University of Technology, 1995.
[33] Rans C, Straznicky P V, Alderliesten R C. Riveting Process Induced Residual Stresses Around Solid Rivets in Mechanical Joints. Journal of Aircraft, 2007, 44(1):323-329.
[34]无头铆钉干涉配合铆接试验组.无头铆钉干涉配合铆接工艺试验报告.西北工业大学学报, 1974(2):73-84.
[35]袁振,孙颖,胡伟平,等. 带板连接件铆钉孔周应力分布研究[C]. 北京: 北京力学会第20届学术年会论文集2014.
[36] Mu W Q, Li Y, Zhang K F, et al. An effective method of studying interference-fit riveting for 2117-T4 aluminum slug rivet [C]. Chengdu: 2010 International Conference on Computer and Communication Technologies in Agriculture Engineering, 2010:303-307.
[37]王宇波,余路,洪华舟,等.自动钻铆连接件疲劳性能分析.南京航空航天大学学报,2012,4(44):52-55.
[38]李奕寰,曹增强,张岐良,等.铆模倾角对铆接质量的影响研究. 航空学报, 2013,34(2):426-433.
[39]殷俊清,王仲奇,康永刚,等.仿真技术在飞机自动钻铆中的应用. 航空制造技术,2009(24):84-87.
[40]刘萍,张开达.干涉对复合材料叠层板螺栓连接疲劳强度的影响.航空学报,1991, 12(12):545-549.
[41]刘东星,陶华,刘早立,等.干涉量对复合材料层合板疲劳寿命的影响.航空制造技术,2011, 8:80-82.
[42] Saadat M. Challenges in the Assembly of Large Aerospace Components[C]. Siegen: Integrated Systems, Design and Technology 2010, 2011:37-46.
[43]曹增强.电磁铆接技术在大飞机制造中的应用初探.航空学报,2008,29(3):716-720.