[1] Yamaguchi M. High-temperatures structural intermetallics. Acta Mater, 2000 (48): 307-322.
[2] Kim Y W. Microstructureal evolution and mechanical properties of a forged gamma titanium aluminide alloy. Acta Mater, 1991(40): 1121-1134.
[3] 谢建新，刘静安. 金属挤压理论与技术. 北京：冶金工业出版社，2002.
[4] Clemens H, Kestler H, Eberhardt N, et al. Processing of γ-TiAl based alloys on an industrial scale. Kim Y W, Dimiduk D M, Loretto M H. Gamma Titanium Aluminides. 1999: 209-223.
[5] Appel F, Brossmann U, Christoph U, et al. Recent progress in the development of gamma titanium aluminide Alloys. Advanced Engineering Materials, 2000, 2(11): 699-720.
[6] 白星良. 有色金属挤压与拉拔. 北京：冶金工业出版社, 2010：83.
[7] 温景林，丁桦，曹富荣，等. 有色金属挤压与拉拔技术. 北京：化学工业出版社, 2007: 102.
[8] Hu M L, Ji Z S, Chen X Y. Effect of extrusion ratio on microstructure and mechanical properties of AZ91D magnesium alloy recycled from scraps by hot extrusion. Trans Nonferrous Met Soc China, 2010, 20(9): 987-991.
[9] Wen L H, Ji Z S, Li X L. Effect of extrusion ratio on microstructure and mechanical properties of Mg-Nd-Zn-Zr alloys prepared by a solid recycling process. Materials Characterzation, 2008, 59(6): 1655-1660.
[10] 昌霞. 改善变形钛铝合金组织均匀性的研究[D]. 北京：钢铁研究总院, 2008: 46-60.
[11] 李庆波， 周海涛， 刘志超，等. AZ80镁合金变形特性及管材挤压数值模拟研究. 热加工工艺，2010(5)：31-34.
[12] Jiang B, Gao L, Huang G J. Effect of extrusion processing parameters on microstructure and mechanical properties of as-extruded AZ31 sheets. Trans Nonferrous Met Soc China, 2008, 18(1): 160-164.
[13] 王富耻, 张朝晖. 静液挤压技术. 北京: 国防工业出版社, 2008: 145.
[14] Kim H Y, Hong S H. High temperature deformation behavior and microstructural evolution of Ti-47Al-2Cr-4Nb intermetallic alloys. Scripta Materialia, 1998, 38(10): 1517-1523.
[15] Nagasekhar A V, Tick-Hon Y I P, LI S. Finite elementstudy of multipass equal channel angular ext rusion/ pressing.International Journal of Nanoscience, 2005, 4A(4): 745-751.
2014, 
