[1] Roades M L, Roades L J. Method and apparatus for die forming sheet materials. United States Patent NO.5085068, Feb 4, 1992.
[2] Liu J, Westhoff B, Ahmetogla M, et al. Application of viscous pressure forming (VPF) to low volume stamping of difficult-to-forming alloys-results of preliminary FEM simulations. Journal of Material Processing Technology, 1996, 59(1): 49-58.
[3] 王忠金,王仲仁. 板料粘性介质胀形过程应变速率变化的模拟研究. 塑性工程学报,1999,6(3):46-48.
[4] 王新云. 薄板件粘性介质压力成形过程数值模拟与实验研究[D]. 哈尔滨:哈尔滨工业大学,2002.
[5] Liu J H, Tuz A, Ahmetoglu M A, et al. Viscous pressure forming (VPF) technology of plasticity. Proceedings of Fifth International Conference on Technology of Plasticity, Columbus, 1996(2): 671-674.
[6] 胡震宇. 粘性介质压力成形高温合金波纹形薄壁件的试验研究[D]. 哈尔滨: 哈尔滨工业大学,2001.
[7] Wang Z J, Wang X Y, Wang Z R. Viscous pressure forming (VPF) of corrugated thin-walled sheet part with small radius. Journal of Materials Processing Technology, 2004, 145(3): 345-351.
[8] 王忠金,王仲仁,王君平,等. 冲压发动机超薄壁波纹形件的粘性介质压力成形. 推进技术,2002,23(1):84-88.
[9] 王忠金. 局部大落差异形曲面构件粘性介质压力成形. 哈尔滨:哈尔滨工业大学,2004.
[10] Wang Z R, Wang X Y, Wang Z J. Numerical simulation and experimental research on the forming of thin-walled complex parts with viscous pressure forming (VPF). Korea Numisheet’2002, 2002.
[11] 王忠金. 大尺寸超薄壁厚构件粘性介质压力整体成形. 哈尔滨:哈尔滨工业大学,2004.
[12] 王忠金. 非对称局部大落差构件粘性介质压力整体成形. 哈尔滨:哈尔滨工业大学,2010.
[13] Liu J G, Wang Z J, Wang Z R. Numerical simulation of the influence of viscous adhesive stress on the viscous pressure bulging process of hemispherical sphere. Transaction of Nonferrous Metals Society of China, 2003, 13(6): 1354-1359.
[14] 刘建光.板材粘性介质压力胀形过程有限元模拟与实验研究[D].哈尔滨: 哈尔滨工业大学,2002.
[15] Liu J, Ahmetoglu M, Altan T. Evaluation of sheet metal formability, viscous pressure forming (VPF) dome test. Journal of Material Processing Technology, 2000(98): 1-6.
[16] Shulkin L B, Posteraro R A, Ahmetoglu M A, et al. Blank holder force (BHF) control in viscous pressure forming (VPF) of sheet metal. Journal of Material Processing Technology. 2000(98): 7-16.
[17] Shulkin B L. Design for temporal and spatial variation of blank holder pressure in sheet metal forming [D]. The Ohio State University, 1997.
[18] Gutscher G, Wu H C, Ngaile G, et al. Determination of flow stress for sheet metal forming using the viscous pressure bulge (VPB) test. Journal of Materials Processing Technology, 2004(146): 1-7.
[19] Wang Z J, Liu J G, Wang Z R, et al. Deformation behavior of sheet metals and viscous medium in viscous pressure bulging process with back viscous pressure. Transaction of Nonferrous Metals Society of China, 2003, 13(1): 136-139.
[20] 王忠金,王新云,王仲仁. 粘性介质压力成形的应用研究. 航空学报,2003,24(1):79-83.
[21] 王忠金,王新云,王仲仁. 阶梯形件粘性介质压力成形的试验研究. 锻压技术,2001,26(4):31-33.
[22] 刘建光,王忠金,王仲仁,等. 涡扇发动机铝合金碗形件的粘性介质压力成形. 推进技术,2003,24(6):573-576.
[23] Wang Z J, Wang X Y, Wang Z R. Effect of blank holder pressure on viscous pressure forming aluminum alloy ladder parts. Transactions of Nonferrous Metals Society of China, 2002, 12(1): 109-114.
[24] 王忠金. 镍基高温合金大变径比构件粘性介质成形. 哈尔滨:哈尔滨工业大学,2012.