[1] 陈绍杰. 复合材料修理指南. 北京: 航空工业出版社, 2001.
[2] FAWCETT A J, OAKES G D. Boeing composite airframe damage tolerance and service experience. Chicago: Composite Damage Tolerance and Maintenance Workshop, 2006.
[3] Boeing. Boeing 737-300 Structural repair manual. Boeing, 2000.
[4] 梁艳勤. 民机复合材料结构修理容限与修理后适航符合性验证研究. 上海: 上海交通大学, 2011.
[5] DANO M L, GENDRON G, PICARD A. Stress and failure analysis of mechanically fastened joints in composite plates. Composite Structures, 2000, 50: 287-296.
[6] MCCARTHY C T, MCCARTHY M A, LAWLOR V P. Progressive damage analysis of multi-bolt composite joints with variable bolt-hole clearances. Composite Part B, 2005, 36(4): 290-305.
[7] FOX D E, SWAIM K W. Static strength characteristics of mechanically fastened composite joints. NASA/TM-1999-209735.
[8] MCCARTHY C T, MCCARTHY M A. Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints: PartⅡ Effects of bolt-hole clearance. Composite Structures, 2005, 71(2): 159-175.
[9] MCCARTHY M A, MCCARTHY C T. A simple method for determining the effects of bolt-hole clearance on load distribution in single-column multi-bolt composite joints. Composite Structures, 2006, 73(1): 78-87.
[10] ALAATTIN A. Bearing strength of carbon epoxy laminates under static and dynamic loading. Composite Structures, 2005, 67(4): 485-489.
[11] ALAATTIN A, HUSNU D. The effect of stacking sequences of carbon epoxy laminates on pinned-joint strength. Composite Structures, 2003, 62(1): 107-111.
[12] HEUNG-JOON P. Effects of stacking sequences and clamping force on the bearing strengths of mechanically fastened joints in composite laminates. Composite Structures, 2001, 53(2): 213-221.
[13] 蔡闻峰, 薛小平. 先进复合材料结构飞机机械连接技术现状及发展方向. 航空精密制造技术, 2010(2): 22-24.
[14] 刘善国. 国外先进飞机制造技术发展趋势. 航空科学技术, 2003(4): 26-29.
[15] 陈迟, 汪海, 陈秀华. 含多源损伤的胶结修补结构有限元分析方法. 力学季刊, 2007, 28(1): 129-134.
[16] 杨孚标, 肖加余, 曾竟成. 双向受载裂纹板的碳纤维复合材料补片的胶结修补分析. 国防科技大学学报, 2005, 27(6): 21-25.
[17] BAKER A A, ROSE L R F, JONES R. Advances in the bonded composite repair of metallic aircraft structure. Elsevier Science, 2003.
[18] SOUTIS C, DUAN D-M, GOUTAS P. Compressive behavior of CFRP laminates repaired with adhesively bonded external patches. Composite Structures, 1999, 45: 289-301.
[19] HU F Z, SOUTIS C. Strength prediction of patch-repaired CFRP laminates loaded in compression. Composites Science and Technology, 2000, 60(7): 1103-1114.
[20] BARUT A, HANAUSKA J, MADENCI E, et al. Analysis method for bonded patch repair of a skin with a cutout. Composite Structures, 2002, 55(3): 277-294.
[21] ENGELS H, BECKERW. Closed-form analysis for external patch repairs of laminates. Composite Structures, 2002, 56(3): 259-268.
[22] JONES J S, GRAVES S R. Repair techniques for Celion/LARC-160 graphite/polyimide composite structures. NASA-CR-3794, 1984.
[23] FOUND M S, FRIEND M J. Evaluation of CFRP panels with scarf repair patches. Composite Structures, 1995, 32: 122-125.
[24] 喻梅, 胡新宇. 复合材料挖补修理结构的有限元建模及精度影响分析. 安徽建筑工业学院学报, 2009(6): 1-6.
[25] CAMPOHO R D. Tensile behavior of three-dimensional carbon-epoxy adhesively-bonded single and double-scarf repairs. Adhesion and Adhesives, 2009(6): 678-686.
[26] WANG C H, GUNNION A J. Optimum shapes of scarf repairs. Composite Part A, 2009, 40(9): 1407-1418.
[27] PAGE S A, MEZZENGA R, BOOGH L, et al. Surface energetic evolution during processing of epoxy resins. Colloid Interf. Sci, 2000, 222: 55-62.
[28] 陈先有, 崔晶. 航空复合材料结构修补技术分析. 航空科学技术, 2007(2): 32-33.
[29] LOPATA V J. The manufacturing and repair of high performance composites using electron beam curing. Materials Technology, 1999, 56(4): 417-427.
[30] 李玉彬, 张佐光, 孙志杰. 环氧树脂电子束固化微观结构及其影响因素. 北京航空航天大学学报, 2007, 33(8): 986-990.
[31] 陈浩, 刘玉亭, 刘成武, 等. 光固化复合材料预浸料修理补片的研制. 兵器材料科学与工程, 2008, 31(2): 91-94.
[32] BALDWIN H. Composite evolution. Overhaul & Maintenance, 2011, 6: 32-33.
[33]谭朝元, 孙宝岗, 邓火英, 等. 结构复合材料修补技术研究进展. 宇航材料工艺, 2011(2): 26-39.
[34] SWIFT E J, LEVALLEY B D, BOYER D B. Evaluation of new methods for composite repair. Dental Materials, 1992, 8(6): 362-365