[1] 关桥, 邵亦陈. 航空特种焊接/连接技术体系的形成和发展.航空制造技术, 2012, 409(13): 34-39.
[2] Arrieta J, Striz A J. Optimal design of aircraft structures with damage tolerance requirements. Struct Multidiscip O, 2005, 30: 155 -163.
[3] 王向明, 刘文珽. 飞机钛合金结构的设计与应用. 北京: 国防工业出版社, 2010.
[4] 史耀武. 焊接技术手册(上). 北京: 化学工业出版社, 2009.
[5] 李晓延, 巩水利, 关桥,等. 大厚度钛合金结构电子束焊接制造基础研究. 焊接学报, 2010, 2(2): 107-112.
[6] 吴新强. TC4钛合金电子束焊接数值模拟及接头组织与性能[D]. 南京:南京航空航天大学, 2011.
[7] Saresh N, Pillai M G, Mathewa J, et al. Investigations into the effects of electron beam welding on thick Ti–6Al–4V titanium alloy. J Mater Process Tech, 2007, 192–193: 83–88.
[8] Balasubramanian T S, Balakrishnan M, Balasubramanian V, et al. Effect of welding processes on joint characteristics of Ti–6Al–4V alloy. Sci Technol Weld and Joi, 2011, 16 (8): 702–708.
[9] LIU H, Nakata K, Yamamoto N, et al. Microstructural characteristics and mechanical properties in laser beam welds of Ti6Al4V alloy. J Mater Sci, 2012,47: 1460-70.
[10] LIU H, NAKATA K, ZHANG J X, et al. Microstructural evolution of fusion zone in laser beam welds of pure titanium. Mater Charact, 2012, 65: 1-7.
[11] LU W, SHI Y W, LI X Y, et al. Effect of electron beam welding on the microstructures and mechanical properties of thick TC4-DT alloy. Mater Design, 2012, 34: 509-15.
[12] 张翥, 王群骄, 莫畏. 钛的金属学和热处理. 北京: 冶金工业出版社, 2009.
2015, 
