Abstract：Welding is a vital process of the aircraft manufacturing, and the reliability of welding structure largely depends on the performance of welded joints. Aluminum alloy, as an important lightweight aerial material, has an important impact on the development of aviation industry. Magnetic pulse spot welding for connection of aluminum alloy thin plates was proposed to realize solid-phase welding of aluminum alloy plates. The influence of process parameters on the welding quality of aluminum alloy spot welded joints was studied by changing the welding standoff distance. Photonic Doppler velocimetry (PDV) was used to obtain the information of the flying plate during deformation processes. The mechanical properties of the joint were evaluated by quasi-static shear tensile test. The microstructure of welded joint was analyzed by optical microscope, polarizing microscope and scanning electron microscope (SEM). The results show that when the welding standoff distance increases from 0.9mm to 1.5mm, the speed of the flying plate and the welding length of the spot-welded joint both increase accordingly, which has a positive effect on the increase of welding length and the performance of spot-welded joints. After comprehensive analysis, it is concluded that 1.2mm welding standoff distance provides a suitable collision velocity for welding parts, and the mechanical performance is the best.
柳泉潇潇，朱佳佩，崔俊佳. 焊接间隙对铝合金薄板磁脉冲点焊接头组织和力学性能的影响[J]. 航空制造技术, 2020, 63(21): 14-20.
LIU Quanxiaoxiao, ZHU Jiapei, CUI Junjia. Effect of Welding Standoff Distance on Microstructure and Mechanical Properties of Magnetic Pulse Spot Welding Joints of Aluminum Alloy Sheet. Aeronautical Manufacturing Technology, 2020, 63(21): 14-20.
2020, 
