[1] 王向明, 刘文珽. 飞机钛合金结构的设计与应用[M]. 北京：国防工业出版社, 2010.
[2] Neye G, Heider P. Laser beam welding of modern Al-alloy for the aircraft industry. Proc. Conf. ECLAT’ 94/Dusseldorf: Deutscher Verband für Schweiβtechnik, 1994: 108-117.
[3] Mendez P F, Eagar T W. Welding process for aeronautica. Adv Mater Process, 2001, 159(5): 39-43.
[4] Dttrich D, Standfuss J, Liebacher L, et al. Laser beam welding of hard to weld Al alloys for a regional aircraft fuselage design-first results. Phys Procedia, 2011, 12(1): 113-122.
[5] Prisco A, Troiano G, Acerra F, et al. LBW of similar and dissimilar skin-stringer joints. Part I: Process optimization and mechanical characterization. Adv Mater Res, 2008, 38: 306–319.
[6] Squillace A, Prisco U. Influence of filler material on micro-and-macromechanical behaviour of laser-beam-welded T-joint for aerospace applications. Mat Res, 2013, 16(5): 1106-1112.
[7] YANG A B, TAO W, LI L Q, et al. Double-sided laser beam welded T-joints for aluminum aircraft fuselage panels: Process, microstructure, and mechanical properties. Materials and Design, 2012, 33: 652-658.
[8] 杨志斌, 陶汪, 李俐群,等. T型接头双侧激光同步焊接缺陷补焊工艺及性能. 中国激光, 2013, 40(2): 1-6.
[9] TAO W, YANG Z B, CHEN Y B,et al.Double-sided fiber laser beam welding process of T-joints for aluminum aircraft fuselag epanels: Filler wire melting behavior, processstability, and their effects on porosity defects. Optics & Laser Technology, 2013, 52: 1-9.
[10] HB5143-96. 金属室温拉伸试验方法, 1996.
[11] 张翥, 王群骄, 莫畏. 钛的金属学和热处理. 北京: 冶金工业出版社, 2009.
2015, 
