[1] 刘大响, 程荣辉. 世界航空动力技术的现状及发展动向.北京航空航天大学学报, 2002, 28(5):490-496.
[2] 陈光. 新型发动机的一些新颖结构. 航空发动机, 2001, 1:3-10.
[3] 夏明莉, 刘道新, 杜东兴,等. 喷丸强化对TC4 钛合金表面完整性及疲劳性能的影响. 机械科学与技术, 2012, 31(8):1349-1354.
[4] 高玉魁. 喷丸对TC18 钛合金拉-拉疲劳性能的影响. 稀有金属材料与工程, 2004, 33(9):1000-1002.
[5] 高玉魁. 喷丸强化对TC4 钛合金组织结构的影响. 稀有金属材料与工程, 2010, 39(3):1536-1539.
[6] 邓瑛, 韩秀全, 邵杰,等. 钛合金三层空心结构模拟件设计及高周疲劳实验. 航空制造技术, 2013 , 16:157-159.
[7] Jaap S. Fatigue of structures and materials. Springer Science+Business Media B.V, 2009.
[8] 李国祥. 喷丸成形. 北京:国防工业出版社, 1982.
[9] Taehyung K , Lee H, Minsoo K,et al. A 3D FE model for evaluation of peening residual stress under angled multi-shot impacts. Surface & Coatings Technology, 2012, 206: 3981-3988.
[10] XIE L, ZHANG J, XIONG C,et al. Investigation on experiments and numerical modelling of the residual stress distribution in deformed surface layer of Ti–6Al–4V after shot peening. Materials and Design, 2012, 41: 314-318.
[11] Kim T, Lee H, Hong C H,et al. A simple but effective FE model with plastic shot for evaluation of peening residual stress and its experimental validation. Materials Science and Engineering A,2011, 528:5945-5954.
[12] Kim T, Lee H, Hong C H, et al. Effects of Rayleigh damping, friction and rate-dependency on 3D residual stress simulation of angled shot peening. Materials and Design, 2013, 46: 26-37.
[13] Sara B, Ramin G, Mario G. On the shot peening surface coverage and its assessment by means of finite element simulation: a critical review and some original developments. Applied Surface Science, 2012, 259: 186-194.
[14] XUN Y W, TAN M J. Applications of superplastic forming and diffusion bonding to hollow engine blades. Journal of Materials Processing Technology, 2000, 99: 80-85.
[15] 胡凯征, 吴建军, 王涛,等. 基于温度场的喷丸成形数值模拟及参数优化. 中国机械工程, 2007, 18(3):292-295.
2015, 
