Research on Grinding and Polishing Performance of Titanium Alloy Fan Blade
LIU Xuan1, ZHAO Zhengcai1, FU Yucan1, XU Jiuhua1, LI Zhiqiang2
1. College of Mechanical and Electronic Engineering, Nanjing University of Aeronautics and Astronautics,Nanjing 210016, China;
2. AVIC Manufacturing Technology Institute, Beijing 100024, China
Abstract:For the grinding wheel wear and burn of workpiece when grinding and polishing titanium alloy fan blade,
the grinding and polishing performance of titanium alloy was studied, including the style of grinding wheel and the process
parameters. The study shows that the wheel GC46L10V performs well with the material removal rate of 5000mm3/min and
the grinding ratio of 2.5 to promise the quality of workpiece. And the CBN grinding wheel also has good performance with
the material removal rate of 2000mm3/min and the grinding ratio of 4. To prove results of the study, the experiment of abrasive
belt grinding titanium alloy fan blade is conducted and achieves high quality of workpiece.
刘 轩1,赵正彩1,傅玉灿1,徐九华1,李志强2. 钛合金风扇叶片磨抛加工性能试验研究*[J]. 航空制造技术, 2017, 60(17): 84-90.
LIU Xuan1, ZHAO Zhengcai1, FU Yucan1, XU Jiuhua1, LI Zhiqiang2. Research on Grinding and Polishing Performance of Titanium Alloy Fan Blade. Aeronautical Manufacturing Technology, 2017, 60(17): 84-90.