镍基高温合金摩擦焊接研究现状

doi:10.16080/j.issn1671-833x.2015.15.101

摘要
参考文献
相关文章 (15)

全文: PDF (873 KB)
输出: BibTeX | EndNote (RIS)

摘要镍基高温合金是航空发动机、燃气轮机等高温部件的重要制造材料，与之相关的摩擦焊工艺正因工程需求的增长而日渐受到重视。主要介绍了目前应用最为广泛的3种摩擦焊接方法（线性摩擦焊、惯性摩擦焊与搅拌摩擦焊）在高温合金焊接上的应用，涵盖了高温合金接头显微组织、力学性能、工艺探索、数值模拟等方面，较为全面地总结了镍基高温合金摩擦焊接的研究现状，并提出了今后在相关研究中应考虑的关键问题。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	李翔
	肖遥
	马铁军
	李文亚
	杨夏炜

关键词 ：镍基高温合金, 线性摩擦焊, 惯性摩擦焊, 搅拌摩擦焊

基金资助:西北工业大学基础研究基金（JC201233）资助。

引用本文:

李翔，肖遥，马铁军，李文亚，杨夏炜. 镍基高温合金摩擦焊接研究现状[J]. 航空制造技术, 2015, 58(15): 101-104.

链接本文:

http://www.amte.net.cn/CN/10.16080/j.issn1671-833x.2015.15.101 或 http://www.amte.net.cn/CN/Y2015/V58/I15/101

[1] 中国航空材料手册编辑委员会编.中国航空材料手册（第2卷）:变形高温合金、铸造高温合金. 北京: 中国标准出版社, 2002.
[2] 李亚江, 夏春智, 石磊. 国内镍基高温合金的焊接研究现状. 现代焊接, 2010(7):1-4.
[3] 李晓红, 毛唯, 熊华平. 先进航空材料和复杂构件的焊接技术. 航空材料学报, 2006, 26(3):276-282.
[4] Karadge M, Preuss M, Lovell C, et al. Texture development in Ti-6Al-4V linear friction welds. Materials Science and Engineering: A, 2007, 459(1):182-191.
[5] Chamanfar A, Jahazi M, Gholipour J, et al. Mechanical property and microstructure of linear friction welded WASPALOY. Metallurgical and Materials Transactions A, 2011, 42(3):729-744.
[6] Chamanfar A, Jahazi M, Gholipour J, et al. Suppressed liquation and microcracking in linear friction welded WASPALOY. Materials & Design, 2012, 36: 113-122.
[7] Chamanfar A, Jahazi M, Gholipour J, et al. Maximizing the integrity of linear friction welded Waspaloy. Materials Science and Engineering: A, 2012, 555:117-130.
[8] 杨军, 周昀, 楼松年, 等. GH4169 合金惯性摩擦焊接头的高温持久性能. 上海交通大学学报, 2003, 37(2):157-160.
[9] Mary C, Jahazi M. Multi-scale analysis of IN‐718 microstructure evolution during linear friction welding. Advanced Engineering Materials, 2008, 10(6): 573-578.
[10] Li H Y, Huang Z W, Bray S, et al. High temperature fatigue of friction welded joints in dissimilar nickel based superalloys. Materials Science and Technology, 2007, 23(12):1408-1418.
[11] Ola O T, Ojo O A, Wanjara P, et al. Analysis of microstructural changes induced by linear friction welding in a nickel-base superalloy. Metallurgical and Materials Transactions A, 2011, 42(12):3761-3777.
[12] Ola O T, Ojo O A, Wanjara P, et al. Crack-free welding of IN 738 by linear friction welding. Advanced Materials Research, 2011, 278: 446-453.
[13] Ola O T, Ojo O A, Wanjara P, et al.A study of linear friction weld microstructure in single crystal CMSX-486 superalloy. Metallurgical and Materials Transactions A, 2012, 43(3):921-933.
[14] Wanjara P, Dalgaard E, Gholipour J, et al. Linear friction welding of a single crystal superalloy. Materials Science Forum, 2012, 706:3022-3027.
[15] Karadge M, Preuss M, Withers P J, et al. Importance of crystal orientation in linear friction joining of single crystal to polycrystalline nickel-based superalloys. Materials Science and Engineering: A, 2008, 491(1):446-453.
[16] Maalekian M. Friction welding-critical assessment of literature. Science and Technology of Welding & Joining, 2007, 12(8):738-759.
[17] 卜文德, 刘金合, 徐韦锋, 等. GH4169 高温合金惯性摩擦焊接头温度场分布及变化规律. 航空制造技术, 2010(7): 84-88.
[18] 杨军, 楼松年, 严隽民, 等. GH4169 高温合金惯性摩擦焊接头晶粒分布特征. 焊接学报, 2001, 22(3):33-35.
[19] 杨军, 楼松年, 周昀, 等. GH4169 高温合金惯性摩擦焊接头动态再结晶过程. 航空材料学报, 2002, 22(2):8-11.
[20] Preuss M, Withers P J, Baxter G J. A comparison of inertia friction welds in three nickel base superalloys. Materials Science and Engineering: A, 2006, 437(1):38-45.
[21] 王文超, 杨颂华, 姜坤, 等. GH4169 高温合金惯性摩擦焊接接头的蠕变性能. 焊接技术, 2013(4):8-11.
[22] Zhang L W, Liu C D, Qi S A, et al. Numerical simulation of inertia friction welding process of GH4169 alloy. Journal de Physique IV (Proceedings) EDP Sciences, 2004, 120:681-687.
[23] Zhang L W, Pei J B, Zhang Q Z, et al.The coupled FEM analysis of the transient temperature field during inertia friction welding of GH4169 alloy. Acta Metallurgica Sinica (English Letters), 2007, 20(4):301-306.
[24] 李文亚, 陈亮, 余敏. GH4169 合金惯性摩擦焊接头温度场显式有限元数值模拟. 焊接学报, 2011, 32(6):61-64.
[25] Grant B, Preuss M, Withers P J, et al. Finite element process modelling of inertia friction welding advanced nickel-based superalloy. Materials Science and Engineering: A, 2009, 513:366-375.
[26] Huang Z W, Li H Y, Preuss M, et al. Inertia friction welding dissimilar nickel-based superalloys alloy 720Li to IN718. Metallurgical and Materials Transactions A, 2007, 38(7):1608-1620.
[27] Huang Z W, Li H Y, Preuss M, et al. Inertia friction welding dissimilar nickel-based superalloys alloy 720Li to IN718. Metallurgical and Materials Transactions A, 2007, 38(7):1608-1620.
[28] Daus F, Li H Y, Baxter G, et al. Mechanical and microstructural assessments of RR1000 to IN718 inertia welds-effects of welding parameters. Materials Science and Technology, 2007, 23(12):1424-1432.
[29] 何胜春, 张田仓, 郭德伦. 粉末高温合金 FGH96 惯性摩擦焊接头常温力学性能分析. 航空材料学报, 2006, 26(3):122-125.
[30] 何胜春, 廖云建, 杨美, 等. 粉末高温合金 FGH96 惯性摩擦焊接头室温 CTOD 测试与分析. 航空制造技术, 2012(13):98-100.
[31] 张利国, 姬书得, 张田仓, 等. FGH96 合金惯性摩擦焊过程飞边形成的规律研究. 北京理工大学学报, 2013(1):17-21.
[32] 姬书得, 刘伟, 张利国, 等. FGH96 合金惯性摩擦焊过程材料流动行为的数值模拟. 材料科学与工艺, 2013(1):109-112.
[33] 姬书得, 刘建光, 张利国, 等. 焊接工艺参数对 FGH96 合金惯性摩擦焊过程材料塑性流动行为的影响. 机械工程学报, 2012, 48(12):69-74.
[34] 关桥, 栾国红. 搅拌摩擦焊的现状与发展. 第11次全国焊接会议.上海: 2005.
[35] Sato Y S, Arkom P, Kokawa H, et al. Effect of microstructure on properties of friction stir welded Inconel Alloy 600. Materials Science and Engineering: A, 2008, 477(1):250-258.
[36] Mishra R S, Ma Z Y. Friction stir welding and processing. Materials Science and Engineering: R: Reports, 2005, 50(1):1-78.
[37] Ye F, Fujii H,Tsumura T, et al. Fricition stir welding of Inconel alloy 600. Journal of Materials Science, 2006, 41(16):5373-5379.
[38] Song K H, Fujii H, Nakata K. Evaluation of grain refinement and mechanical property on friction stir welded Inconel 600. Materials Transactions, 2009, 50(4):832-836.
[39] Song K H, Fujii H, Nakata K. Effect of welding speed on microstructural and mechanical properties of friction stir welded Inconel 600. Materials & Design, 2009, 30(10):3972-3978.
[40] Song K H, Kim W Y, Nakata K. Evaluation of microstructures and mechanical properties of friction stir welded lap joints of Inconel 600/SS 400. Materials & Design, 2012, 35:126-132.
[41] Song K H, Nakata K. Mechanical properties of friction-stir-welded inconel 625 alloy. Materials Transactions, 2009, 50(10):2498-2501.
[42] Song K H, Nakata K. Effect of precipitation on post-heat-treated Inconel 625 alloy after friction stir welding. Materials & Design, 2010, 31(6):2942-2947.
[43] Song K H, Nakata K. Microstructural and mechanical properties of friction-stir-welded and post-heat-treated Inconel 718 alloy. Journal of Alloys and Compounds, 2010, 505(1):144-150.