[1] 范玉青. 现代飞机制造技术. 北京: 北京航空天大学出版社, 2001.
[2] 袁红璇. 飞机结构件连接孔制造技术. 航空制造技术, 2007(1): 96-99.
[3] DEVLIEG R, SITTON K, FEIKERT E, et al. ONCE (one-sided cell end effector) robotic drilling system. SAE, 2002.
[4] HEMPSTEAD B, DEVLIEG R, MISTRY R, et al. Drill and drive end effector[C]//SAE 2001 Automated Fastening Conference & Exposition, Seattle, WA, USA, 2001.
[5] 张兴华, 郑慧慧. 金属叠层材料层间毛刺形成的钻削实验研究. 现代制造工程, 2011 (10): 79-82.
[6] 王珉, 薛少丁, 蒋红宇, 等. 飞机大部件对接自动化制孔单向压紧力分析. 南京航空航天大学学报, 2012, 44(4): 553-558.
[7] 王珉, 薛少丁, 陈文亮, 等. 面向飞机自动化装配的单向压紧制孔毛刺控制技术. 航空制造技术, 2011(9): 26-29.
[8] 王成勇. 用最小量冷却液法钻削航空铝—钛多层复合板. 机械工程学报, 2002, 38(6): 93-96.
[9] ANTONY F, KAMAL Y T, HARUHIKO A. Flexible fixturing and automatic drilling of sheet metal parts using a robot manipulator. Robotics & Computer- Integrated Manufacturing, 1989, 5(4): 371-380.
[10] SHIKATA H, DEVRIES M F, WU S M, et al. An experimental investigation of sheet metal drilling. Annals of the CIRP, 1980, 1: 85-88.
[11] MELKOTE S N, NEWTON T R, HELLSTERN C, et al. Interfacial burr formation in drilling of stacked aerospace materials. Proceedings of the CIRP International Conference on Burrs, 2009.
[12] WARDAK K R, TASCH U, CHARALAMBIDES P G. Optimal fixture design for drilling through deformable plate workpieces, Part I: model formulation. Journal of Manufacturing Systems, 2001, 20(1):23-32.
[13] WARDAK K R, TASCH U, CHARALAMBIDES P G. Optimal fixture design for drilling through deformable plate workpieces, Part Ⅱ: results. Journal of Manufacturing Systems, 2001, 20(1): 33-43.