氧化物/氧化物陶瓷基复合材料的研究进展

doi:10.16080/j.issn1671-833x.2015.S2.046

摘要
参考文献
相关文章 (15)

全文: PDF (911 KB)
输出: BibTeX | EndNote (RIS)

摘要氧化物/氧化物陶瓷基复合材料具有低密度、高强度、耐高温、抗氧化等优点，是航空航天热端构件理想的候选材料。本文从增强纤维、陶瓷基体、界面层、制备工艺、考核应用等方面综述了氧化物/氧化物陶瓷基复合材料的研究现状，着重阐述了商业化生产的氧化物纤维基本性能以及主要的氧化物/氧化物陶瓷基复合材料制备工艺，并指出提高氧化物纤维高温强度稳定性和优化复合材料制备工艺的途径。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	陈明伟
	李峰
	姜里

关键词 ：氧化物纤维, 陶瓷基复合材料, 界面层, 制备工艺

引用本文:

陈明伟，李峰，姜里. 氧化物/氧化物陶瓷基复合材料的研究进展[J]. 航空制造技术, 2015, 58(增刊S2): 46-49.

链接本文:

http://www.amte.net.cn/CN/10.16080/j.issn1671-833x.2015.S2.046 或 http://www.amte.net.cn/CN/Y2015/V58/I增刊S2/46

[1] KODAMA H, MIYOSHI T. Fabrication and fracture behavior of novel SiC ceramics having rod-like grains. J. Am. Ceram. Soc., 1992, 75(6): 1558-1561.
[2] PADTURE N P. In situ-toughened silicon carbide. J. Am. Ceram. Soc., 1994, 77(2): 519-523.
[3] BESMANN T M, SHELDON B W, LOWDEN R A. Vapor phase fabrication and properties of continuous filament ceramic composites. Science, 1991, 253(6):1104-1109.
[4] RAMAKRISHNA T, BHATT, SUNG R. Impact resistance of uncoated SiC/SiC composites. Materials Science and Engineering A, 2008, 476 (1/2):20-28.
[5] GOETTLER R W. Oxide-oxide continuous fiber ceramic composites for gas turbine applications. ASME, International Gas Turbine and Aeroengine Congress and Exposition, Houston, 1995.
[6] RAJ R. Fundamental research in structure ceramics for service near 2000℃. J. Am. Ceram. Soc., 1993, 76(9):2147-2174.
[7] KRENKEL W. Ceramic matrix composites: fiber reinforced ceramics and their applications. Weinheim: WILEY-VCH Verlag GmbH & Co. KGaA, 2008.
[8] SRIVASTAVA V, KAWADA H. Fatigue behaviour of alumina-fibre-reinforced epoxy resin composite pipes under tensile and compressive loading conditions. Compos. Sci. Technoi., 2001, 61(16):2393-2403.
[9] AKSAY I A, PASK J A. Stable and metastable equilibria in the system SiO2-A12O3. J. Am. Ceram. Soc., 1975, 58(11/12):507-512.
[10] BUNSELL A, BERGER M H. Fine diameter ceramic fibres. J. Eur. Ceram. Soc., 2000, 20(13):2249-2260.
[11] CHEETHAM A K, MELLOT C F. In situ studies of the Sol-Gel synthesis of materials. Chem. Mater.,1997, 9(11):2269-2279.
[12] MANN S, BURKETT S L, DAVIS S A. Sol-Gel synthesis of organized matter. Chem. Mater., 1997, 9(11): 2300-2310.
[13] ROMINE J C. New high temperature ceramic fiber. Ceramic Engineering and Science Proceeding, 1987, 8(7/8):755-758.
[14] KAYA C, BUTLER E, G, LEWIS M H. Microstructurally controlled mullite ceramics produced from monophasic and diphasic sol-derived pastes using extrusion. J. Materials Science, 2003, 38(4):767-777.
[15] CANTONWINE P E. Strength of thermally exposed alumina fibers Part I single filament behavior. Journal of Materials Science, 2003, 38(3):461-470.
[16] CANTONWINE P E. Strength of thermally exposed alumina fibers Part II single filament behavior. Journal of Materials Science, 2003, 38(3):471-480.
[17] Bunsell A R, BERGER M H. Ceramic fiber development and characterization. Key Engineering Materials, 1997, 127-131:15-26.
[18] ILSON D M. Nextel 650 ceramic oxide fiber: new alumina-based fiber for high temperature composite reinforcement. Ceramic Engineering and Science Proceedings, 2000, 21(4):363-373.
[19] DELGLISE, BERGE F, JEULIN M H. Micro structural stability and room temperature mechanical properties of the Nextel 720 fiber. Journal of the European Ceramic Society, 2001, 21(5):569-580.
[ 20] DASSIOS K G, STEEN M, FILIOU C. Mechanical properties of alumina NextelTM 720 fibers at room and elevated temperatures: tensile bundle testing. Materials Science and Engineering A, 2003, 349(1/2):63- 72.
[21] EL-BUAISHI N M, JANKOVIC-CASTVAN I, JOKIC B. Crystallization behavior and sintering of cordierite synthesized by an aqueous Sol-Gel route. Ceramics International, 2012, 38(3):1835-1841.
[22] OCHIAI S, UEDAT, SATO K. Deformation and fracture behavior of an Al2O3/YAG composite from room temperature to 2023 K. Composites Science and Technology, 2001, 61(14):2117-2128.
[23] ARVIND A, KUMAR R, DEOM N. Preparation, structural and thermo-mechanical properties of lithium aluminum silicate glass-ceramics. Ceramics International, 2009, 35(4): 1661-1666.
[24] EICHLER K, SOLOW G, OTSCHIK P. BAS (BaO•Al2O3•SiO2)-glasses for high temperature applications. Journal of the European Ceramic Society, 1999, 19(6/7):1101-1104.
[25] MA W M, WEN L, GUAN R G. Sintering densification, microstructure and transformation behavior of Al2O3/ZrO2(Y2O3) composites. Materials Science and Engineering A, 2008, 477(1/2):100-106.
[26] JIMENEZ-MELENDO M, HANEDA H, NOZAWA H. Ytterbium cation diffusion in yttrium aluminum garnet (YAG)-implications for creep mechanisms. Journal of the American Ceramic Society, 2001, 84(10):2356-2360.
[27] CHEN M W, QIU H P, JIAO J. Preparation of high performance SiCf/SiC composites through PIP process. Key Engineering Materials, 2013, 544: 43-47.
[28] MILLER J H, LIAW P K, LANDS J D. Influence of fiber coating thickness on fracture behavior of continuous woven Nicalon® fabric-reinforced silicon-carbide matrix ceramic composites. Materials Science and Engineering A, 2001, 317:49.
[29] 周洋,周万城,罗发. SiCf/SiC复合材料BN界面相研究进展. 材料导报A, 2013, 27(7):10-15.
[30] 刘海韬, 程海峰, 王军. SiCf/SiC复合材料界面相研究进展. 材料导报, 2010, 24(1):10-15.
[31] RICHARD E T. Recent developments in fibers and inter-phases for high temperature ceramic matrix composites. Composites: Part A, 1999, 30(4):429-437.
[32] TRUSTY P A. Novel techniques for manufacturing woven fiber reinforced ceramic matrix composites I: preform fabrication. Materials and Manufacturing Processed, 1995, 10(6):1215-1226.
[33] 王利明. 溶胶凝胶法制备连续莫来石纤维的研究[D]. 上海: 东华大学, 2005.
[34] CHEN X T, GU L X. The sol–gel transition of mullite spinning solution in relation to the formation of ceramic fibers. Journal of Sol-Gel Science and Technology, 2008, 46:23-32.
[35] 张剑峰. 连续氧化铝基纤维的制备研究[D]. 济南:山东大学, 2004.