[1] BRENNAN J J. Interfacial characterization of a slurry-cast melt-infiltrated SiC/SiC ceramic-matrix composite. Acta Materialia. 2000,48(18/19):4619-4628.
[2] LUTHRA K L, CORMAN G S. Melt infiltrated (MI) SiC/SiC composites for gas turbine applications//High temperature ceramic matrix composites. Wiley-VCH Verlag GmbH & Co. KGaA, 2006: 744-753.
[3] MAGNANT J, PAILLER R, LE PETITCORPS Y, et al. Fiber-reinforced ceramic matrix composites processed by a hybrid technique based on chemical vapor infiltration, slurry impregnation and spark plasma sintering. Journal of the European Ceramic Society, 2013, 33(1):181-190.
[4] LENZ F, KRENKEL W. Fabrication of fiber composites with a MAX phase matrix by reactive melt infiltration. 3rd International Congress on Ceramics: Advanced Engineering Ceramics and Composites, 2011.
[5] MAGNANT J, MAILLE L, PAILLER R, et al. Carbon fiber/reaction-bonded carbide matrix for composite materials - manufacture and characterization. Journal of the European Ceramic Society, 2012,32(16):4497-4505.
[6] KRENKEL W. Microstructure tailoring of C/C-SiC composites. 27th International Cocoa Beach Conference on Advanced Ceramics and Composites: B. Wiley, 2003: 471-476.
[7] KRENKEL W. Applications of fibre reinforced C/C-SiC ceramics. CFI-Ceramic Forum International, 2003,80(8):31-38.
[8] GERN F H, KOCHENDORFER R. Liquid silicon infiltration: description of infiltration dynamics and silicon carbide formation. Composites Part A-Applied Science and Manufacturing, 1997, 28(4):355-364.
[9] DEZELLUS O, JACQUES S, HODAJ F, et al. Wetting and infiltration of carbon by liquid silicon. Journal of Materials Science, 2005, 40(9/10):2307-2311.
[10] KIM S Y, HAN I S, WOO S K, et al. Wear-mechanical properties of filler-added liquid silicon infiltration C/C-SiC composites. Materials & Design, 2013,44:107-113.
[11] FAN S W, XU Y D, ZHANG L T, et al. Three-dimensional needled carbon/silicon carbide composites with high friction performance. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2007, 467(1/2):53-58.
[12] FAN S, ZHANG L, XU Y, et al. Microstructure and properties of 3D needle-punched carbon/silicon carbide brake materials. Composites Science and Technology, 2007, 67(11/12):2390-2398.
[13] FAN S, ZHANG L, XU Y, et al. Microstructure and tribological properties of advanced carbon/silicon carbide aircraft brake materials. Composites Science and Technology, 2008, 68(14): 3002-3009.
[14] 闫志巧, 熊翔, 肖鹏, 等. MSI工艺制备C/SiC复合材料的氧化动力学和机理. 无机材料学报, 2007, 22(6):1151-1158.
[15] 冉丽萍, 易茂中, 王朝胜, 等. 添加Al对MSI制备C/C-SiC复合材料组织和力学性能的影响. 复合材料学报, 2006, 23(5):34-38.
[16] XU Y, CHENG L, ZHANG L. Carbon/silicon carbide composites prepared by chemical vapor infiltration combined with silicon melt infiltration. Carbon, 1999, 37(8):1179-1187.
[17] HILLIG H B, MEHAN R L, MORELOCK C R, et al. Silicon/ silicon carbide composites. Ceramic Bulletin, 1975, 54(12):1054-1056.
[18] BANSAL N P. Handbook of ceramic composites. Springer -Verlag, 2005.
[19] HANZAWA S. Mechanism of synthesizing dense Si-SiC matrix C/C composites. Journal of Materials Science, 2012,47(2):833-844.
[20] 董绍明, 胡建宝, 张翔宇. SiC/SiC复合材料MI工艺制备技术. 航空制造技术, 2014(6):35-40.
[21] WANG Y X, TAN S H, JIANG D L. The fabrication of reaction-formed silicon carbide with controlled microstructure by infiltrating a pure carbon preform with molten Si. Ceramics International, 2004,30(3):435-439.
[22] 万玉慧, 徐永东, 潘文革. 反应熔体浸渗法制备C/SiC复合材料的结构与力学性能. 玻璃钢/复合材料, 2005(5):20-24.
[23] CAI Y, XU Y, LI B, et al. Microstructures and mechanical properties of a low-cost three-dimensional needled carbon/silicon carbide composite. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2008, 497(1/2):278-282.
[24] NIE J, XU Y, ZHANG L, et al. Microstructure, thermophysical, and ablative performances of a 3D needled C/C-SiC composite. International Journal of Applied Ceramic Technology, 2010, 7(2): 197-206.
[25] LI Z, XIAO P, XIONG X, et al. Preparation and tribological properties of C fibre reinforced C/SiC dual matrix composites fabrication by liquid silicon infiltration. Solid State Sciences, 2013,16:6-12.
[26] YIN J, ZHANG H, XIONG X, et al. Ablation properties of C/C-SiC composites tested on an arc heater. Solid State Sciences, 2011,13(11):2055-2059.
[27] 王道岭, 汤素芳, 邓景屹, 等. 熔融硅液相浸渍法制备C/C-SiC复合材料. 材料研究学报, 2007, 21(2):135-139.
[28] 刘红. 碳纤维增强SiC陶瓷复合材料的制备[D]. 成都: 中科院光电技术研究所, 2006.
[29] LI S, ZHANG Y, HAN J, et al. Effects of random chopped fiber on the flexural strength and toughness of reaction bonded silicon carbide composite. Ceramics International, 2012,38(6):4695-4699.
[30] 崔园园, 白瑞成, 孙晋良, 等. 熔融渗硅法制备C/C-SiC复合材料的研究进展. 材料导报A:综述篇, 2011,25(1):31-35.
[31] XU S, QIAO G, LI D, et al. Reaction forming of silicon carbide ceramic using phenolic resin derived porous carbon preform. Journal of the European Ceramic Society, 2009,29(11):2395-2402.
[32] XUE T, WANG Z J W. Preparation of porous SiC ceramics from waste cotton linter by reactive liquid Si infiltration technique. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2010,527(27/28):7294-7298.
[33] ZHANG Y, XIAO Z, WANG J, et al. Effect of pyrocarbon content in C/C preforms on microstructure and mechanical properties of the C/C-SiC composites. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2009,502(1/2):64-69.
[34] KRENKEL W. Carbon fiber reinforced CMC for high-performance structures. International Journal of Applied Ceramic Technology, 2004,1(2):188-200.
[35] KRENKEL W. Cost effective processing of CMC composites by melt infiltration (LSI-process). Singh M, Jessen T. 25th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: A. Wiley, 2001: 443-454.
[36] MARGIOTTA J C, ZHANG D, NAGLE D C. Microstructural evolution during silicon carbide (SiC) formation by liquid silicon infiltration using optical microscopy. International Journal of Refractory Metals & Hard Materials, 2010, 28(2):191-197.
[37] HEIDENREICH B. Melt infiltration process[M]//Ceramic matrix composites. Wiley-VCH Verlag GmbH & Co. KGaA, 2008:113-139.
[38] FITZER E, GADOW R. Fiber-reinforced silicon carbide. Am. Ceram. Soc. Bull., 1986, 65(2): 326-335.
[39] LI J G, HAUSNER H. Reactive wetting in the liquid-silicon/solid-carbon system. Journal of the American Ceramic Society, 1996,79(4):873-880.
[40] HON M H, DAVIS R F, NEWBURY D E. Self-diffusion of 30Si in polycrystalline β-SiC. Journal of Materials Science, 1980,15(8):2073-2080.
[41] HON M H, DAVIS R F. Self-diffusion of 14C in polycrystalline β-SiC. Journal of Materials Science, 1979, 14(10):2411-2421.
[42] PAMPUCH R, WALASEK E, BIALOSK, RSKI J. Reaction mechanism in carbon-liquid silicon systems at elevated temperatures. Ceramics International, 1986,12(2):99-106.
[43] NESS J N, PAGE T F. Microstructural evolution in reaction-bonded silicon carbide. Journal of Materials Science, 1986,21(4):1377-1397.
[44] SCACE R I, SLACK G A. Solubility of carbon in silicon and germanium. The Journal of Chemical Physics, 1959, 30(6):1551-1555.
[45] FAVRE A, FUZELLIER H, SUPTIL J. An original way to investigate the siliconizing of carbon materials. Ceramics International, 2003, 29(3):235-243.
[46] 王继平, 金志浩, 钱军民, 等. 反应熔渗法制备C/C-SiC复合材料及其反应机理和动力学的研究进展. 硅酸盐学报, 2005,33(9):1120-1126.
[47] SCHULTE-FISCHEDICK J, ZERN A, MAYER J, et al. The morphology of silicon carbide in C/C-SiC composites. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2002,332(1/2):146-152.