[1] Ezugwu E O, Bonney J, Yamane Y. An overview of the machinability of aeroengine alloys. Journal of Materials Processing Technology, 2003 (134): 233-253.
[2] 《中国航空材料手册》编辑委员会编. 中国航空材料手册. 北京:中国标准出版社,2001.
[3] Rahman M, Seah W K H, Teo T T. The Machinability of Inconel 718. Journal of Materials Processing Technology, 1997, 63: 199-204.
[4] Dudzinski D, Devillez A, Moufki A, et al. A review of developments towards dry and high speed machining of Inconel 718 alloy. International Journal of Machine Tools & Manufacture, 2004, 44: 439-456.
[5] Ezugwu E O, Wang Z M, Machado A R. The machinability of nickel-based alloys: a review. Journal of Materials Processing Technology, 1999, 86: 1-16.
[6] Arunachalam R M, Mannan M A, Spowage A C. Residual stress and surface roughness when facing age hardened Inconel 718 with CBN and ceramic cutting tools. International Journal of Machine Tools & Manufacture, 2004 (44): 879-887.
[7] Arunachalam R M, Mannan M A, Spowage A C. Surface integrity when machining age hardened Inconel 718 with coated carbide cutting tools. International Journal of Machine Tools & Manufacture, 2004(44): 1481-1491.
[8] Pawade R S, Joshi S S, Brahmankar P K, et al. An investigation of cutting forces and surface damage in high-speed turning of Inconel 718. Journal of Materials Processing Technology, 2007(192-193): 139-146.
[9] Pawade R S , Joshi S S, Brahmankar P K. Effect of machining parameters and cutting edge geometry on surface integrity of high-speed turned Inconel 718. International Journal of Machine Tools & Manufacture, 2008(48): 15-28.
[10] Ezugwu E O, Bonney J, Fadare D A, et al. Machining of nickel-base, Inconel 718, alloy with ceramic tools under finishing conditions with various coolant supply pressures. Journal of Materials Processing Technology, 2005(162-163): 609-614.
[11] 黄奇,任敬心. 车削与磨削GH33A高温合金表面完整性研究. 航空工艺技术,1991(3): 24-27.
[12] 田荣鑫,姚倡锋,黄新春,等. 面向加工表面粗糙度的钛合金高速铣削工艺参数区间敏感性及优选. 航空学报,2010,31(12): 2464-2470.
[13] 王素玉,赵军,艾兴,等. 高速切削表面粗糙度理论研究综述. 机械工程师,2004(10): 3-6.
[14] 杜随更,吕超,任军学,等. 钛合金高速铣削表面形貌及表层组织研究. 航空学报,2008,29(6): 1710-1715.