[1] Chris R. Next generation out of autoclave systems. Society for the Advancement of Material and Process Engineering (SAMPE), Long Beach CA, 2011.
[2] Chris J W, John R S. The development and application of out-of-autoclave prepreg solution for Airbus A350XWB wing fixed trailing edge . Society for the Advancement of Material and Process Engineering (SAMPE), Long Beach CA, 2011.
[3] Leyla F, Goran F. Void evolution and gas transport during cure in out-of-autoclave prepreg laminates . Society for the Advancement of Material and Process Engineering (SAMPE), Long Beach CA, 2011.
[4] Mark S, Thomas C, Andrew G. The development of out-of-autoclave composite prepreg technology for aerospace applications. Society for the Advancement of Material and Process Engineering (SAMPE), Long Beach CA, 2011.
[5] Grunenfelder L, Nutt S R. Void formation in composite prepregs—Effect of dissolved moisture. Composites Science and Technology, 2010, 70(16):2304-2309.
[6] Flake C C. Manufacturing Processes for Advanced Composites, New York, Elsevier, 2004.
[7] Scott L, Steve H, Jim S. Vacuum bag only processing; improving prepreg out-time and porosity for large composite structure . Society for the Advancement of Material and Process Engineering (SAMPE), Seattle, WA, 2010.
[8] Bryan M L, Kevin H, Goran F. Gas permeability measurements of Out-of-Autoclave prepreg MTM45-1/CF2426A . Society for the Advancement of Material and Process Engineering (SAMPE), Seattle, WA, 2010.
[9] Steve M, Matthew J S, Elizabeth O. Product development for out-of-autoclave (O.o.A) manufacture of aerospace structures . Society for the Advancement of Material and Process Engineering (SAMPE), Seattle, WA, 2010.
[10] Karl R B. Evaluation of detail part fabrication using out-of-autoclave prepreg. Society for the Advancement of Material and Process Engineering (SAMPE), Seattle, WA, 2010.
[11] Jonathan C H, Nobuyuki A, Alfred P H, et al. Satterwhite. Studies for the development of OoA prepreg used in aircraft applications. SAMPE Tech 2011, Fort Worth, Texas, 2011.
[12] Stephanie M T, Jim S P, Leslie J C, et al. Development of Advanced Tape Placement for Out of Autoclave Composites . Society for the Advancement of Material and Process Engineering (SAMPE), Seattle, WA, 2010.