[1] 刘会杰,冯吉才. 陶瓷与金属的连接方法及应用. 焊接,1996(9): 5-9.
[2] 杨敏,邹增大,刘秀忠,等. 陶瓷与金属的连接进展. 山东冶金, 2004, 26(1): 37-39.
[3] 王新阳,李炎,魏世忠,等. 陶瓷与金属连接技术的研究进展. 金属铸锻焊技术, 2009, 38(13): 145-148.
[4] Fernie J A. Joining ceramic materials. Welding and Joining Fabrication, 1990(6): 320-325.
[5] 郭面换,邵春德,董占贵,等. 铁路钢轨与轧叉焊接工艺. 焊接学报, 2000, 21(1): 26-29.
[6] 李亚江,张永喜,王娟,等. 焊接修复技术. 北京:化学工业出版社,2005.
[7] 吴铭方,于治水,王凤江. A12O3/AgCuTi/Nb接头强度及改善. 焊接技术, 2000, 29(5): 18-19.
[8] 王颖. Al2O3陶瓷的反应金属化及与5A05合金扩散钎焊机理研究[D]. 哈尔滨: 哈尔滨工业大学工学,2009: 29-35.
[9] Vianco P T, Stephens J J, Hlava P F. A barrier layer approach to limit Ti scavenging in FeNiCo/Ag-Cu-Ti/Al2O3 active braze joints. Welding Research, 2003, 82(9): 252-262.
[10] 宋晓国, 曹健, 蔺晓超, 等. Si3N4/AgCu/TiAl钎焊接头界面结构及性能. 稀有金属材料与工程, 2011, 40(1): 48-51.
[11] Song X G, Cao J, Wang Y F, et al. Effect of Si3N4-particals addition in Ag-Cu-Ti filler alloy on Si3N4/TiAl brazed joint. Materials Science and Engineering A, 2011, 528: 5135-5140.
[12] He Y M, Zhang J, Sun Y, et al. Microstructure and mechanical properties of the Si3N4/42CrMo steel joints brazed with Ag–Cu–Ti + Mo composite filler. Journal of European Ceramic Society, 2010, 30: 3245-3251.
[13] 刘会杰,李卓然,冯吉才,等. SiC陶瓷与TiAl合金的真空钎焊. 焊接, 1999(3): 7-10.
[14] Xiong H P, Mao W, Xie Y H, et al. Brazing of SiC to a wrought nickel-based superalloy using CoFeNi(Si, B)CrTi filler metal. Materials Letters, 2007, 61: 4662-4665.
[15] 吕宏,康志君, 楚建新,等. 铜基钎料钎焊SiC/Nb的接头组织及强度. 焊接学报, 2005, 26(1): 29-31.
[16] 蔺晓超,曹健,张丽霞,等. ZrO2陶瓷与Kovar合金钎焊接头的组织与性能. 焊接学报, 2011, 32(9): 65-68.
[17] Sciti D, Bellosi A, Esposito L. Bonding of zirconia to super alloy with the active brazing technique. Journal of the European Ceramic Society, 2001, 21: 45-52.
[18] Liu H B, Zhang L X, Wu L Z, et al. Vacuum brazing of SiO2 glass ceramic and Ti-6Al-4V alloy using AgCuTi filler foil. Materials Science and Engineering A, 2008, 498: 321-326.
本文共有参考文献34篇,因篇幅有限,未能一一列出,如有需要,请向本刊编辑部索取。