[1] Rossini R S, Dassisti M, Benyounis K Y, et al. Methods of measuring residual stresses in components. Materials and Design, 2012, 35:572-588.
[2] Guo Y B, Warren A W, Hashimoto F. The basic relationships between residual stress, white layer, and fatigue life of hard turned and ground surfaces in rolling contact. CIRP Journal of Manufacturing Science and Technology, 2010, 2(2):129-134.
[3] Seo J W, Goo B C, Choi J B, et al. Effects of metal removal and residual stress on the contact fatigue life of railway wheels. International Journal of Fatigue, 2008, 30(10-11):2021-2029.
[4] Liu C R, Choi Y. Rolling contact fatigue life model incorporating residual stress scatter. International Journal of Mechanical Sciences, 2008, 50(12):1572-1577.
[5] 董辉跃,柯映林. 残余应力对加工变形影响的分析与模拟. 航空材料学报, 2005, 45(12):1664-1667.
[6] 孙杰,柯映林. 残余应力对航空整体结构件加工变形的影响分析. 机械工程学报,2005,41(2):117-122.
[7] Hiroyuki S. The effect on fatigue life of residual stress and surface hardness resulting from different cutting conditions of 0.45%C steel. International Journal of Machine Tools & Manufacture, 2005, 45(2): 131-136.
[8] Hiroyuki S, Toshiyuki O, Takahiro S. Prediction model of surface residual stress within a machined surface by combining two orthogonal plane models . International Journal of Machine Tools & Manufacture, 2004, 44(7-8): 815-822.
[9] 王立涛. 关于航空框类结构件铣削加工残余应力和变形机理的研究[D]. 杭州:浙江大学, 2003.
[10] 刘海涛,卢泽生,孙亚洲. 切削加工表面残余应力研究的现状与进展. 航空精密制造技术, 2008, 44(1):17-31.
[11] 米谷茂. 残余应力的参数和对策. 朱荆璞, 邵会孟,译. 北京:机械工业出版社, 1983.
[12] 袁发荣,伍尚礼. 残余应力测试与计算. 长沙:湖南大学出版社, 1987.
[13] 王秋成. 航空铝合金残余应力消除及评估技术研究[D]. 杭州:浙江大学,2003.
[14] 王仁智. 残余应力与弹簧的疲劳性能. 理化检验-物理分册, 2005,41(11): 541-548.
[15] Mcgrann R T R, Greving D J, Shadley J R, et al. The effect of coating residual stress on the fatigue life of thermal spraycoated steel and aluminum. Surface and Coatings Technology, 1998,108-109:59-64.
[16] 韩荣第,周明,孙玉洁. 金属切削原理与刀具. 哈尔滨:哈尔滨工业大学出版社, 2004.
[17] 王立涛,许玲萍,张海涛,等. 铣削加工残余应力研究的基本理论和方法. 安徽工程科技学院学报, 2004, 19(20):36-40.
[18] Garcia N V, Gonzalo O, Bengoetxea I. Effect of cutting parameters in the surface residual stresses generated by turning in AISI 4340 steel. International Journal of Machine Tools & Manufacture, 2012(6):48-57.
[19] El-Axil M H. A method of modeling residual stress distribution in turning for different materials. International Journal of Machine Tools & Manufacture, 2002, 42(9):1055-1063.
本文共有参考文献32篇,因篇幅有限,未能一一列出,如有需要,请向本刊编辑部索取。