|
|
高温下开孔复合材料层合板压缩试验及有限元分析 |
欧阳林辉1,霍世慧1,汪帮耀2 |
1.西北工业大学工程力学系
2.长安大学 |
|
|
摘要 在高温环境下对开孔复合材料层合板进行压缩性能试验及其损伤的有限元分析,将得到的压缩强度进行比较,两者相差3.1%,在误差允许的范围内。同时由有限元损伤分析,得到了各铺层角的具体失效损伤图。结果表明,复合材料层合板开孔压缩有限元损伤分析,能够很好地得到复合材料层合板在压缩过程中的损伤扩展和最终破坏,并最终预测复合材料层合板压缩失效模式和压缩强度。
|
|
关键词 :
复合材料层合板,
高温环境,
开孔压缩损伤分析,
失效模式
|
|
[1] Ramadan A. Esmaeel, Farid Taheri. Delamination detection in laminated composite beams using the empirical mode decomposition energy damage index. Composite Structure, 2012(1):1-9.
[2] Ayanci C, Carey J. 2D braided composites: Areview for stiffnes critical application. Composite Structure, 2008, 85(1): 43-58.
[3] Pierron F, Green B, Wisnom M R, et al. Full-field assessment of damage process of laminated composite open-hole tensile specimens. Part II: Experimental Results. Composites Part A: Applied Science and Manufacturing, 2007, 38(11): 2321-2332.
[4] LEE J H. Uniaxial Compressive Behaviour of Carbon Fibre-Epoxy Laminates-Part 2: Notched. EU-Korea conference on science and Technology, 2010, 135: 175-189.
[5] Soutis C, Filiou C. Stress Distributions around Holes in Composite Laminate Subjected to Biaxiaal Loading. Applied Composite Materials, 1998(5): 365-378.
[6] Berbinau P, Filiou C, Soutis C. Stress and failure analysis of composite laminates with an inclusion under multiaxial compression-tension loading. Applied Composite Materials, 2001(8):307-326.
[7] 曹海建,钱坤,魏取福,等. 三维整体中空复合材料压缩性能的有限元分析.复合材料学报,2011,28(1):230-234.
[8] 汪源龙,程小全,范舟,等. 国产CCF300双马树脂层合板高温拉伸与压缩性能试验研究. 复合材料学报,2011,28(3):180-184.
[9] 黎增山,关志东,何为,等. 复合材料层板开孔拉伸损伤分析. 复合材料学报,2012,29 (1):169-175.
|
[1] |
刘岩松,张子健,李志歆,王童,滕飞. 铺层结构对复合材料层合板拉伸性能的影响[J]. 航空制造技术, 2019, 62(4): 47-50. |
[2] |
李小强,冯 丽,翟雨农,李东升,尹 玉,王 亮. 复合材料层合板沉头螺栓接头拉伸性能试验与有限元仿真*[J]. 航空制造技术, 2017, 60(22): 38-44. |
[3] |
屈腾腾,张晓洁,童俊梅,胡 锐. 湿热对玻璃纤维复合材料层合板性能的影响[J]. 航空制造技术, 2017, 60(19): 101-104. |
[4] |
陈 娟1, 王 星2. 含裂口损伤复合材料层合板拉伸试验及数值模拟分析*[J]. 航空制造技术, 2017, 60(18): 106-109. |
[5] |
张婷玉,钟 扬,姚文昊. 复合材料层合板装配精度影响因素研究[J]. 航空制造技术, 2017, 60(17): 91-96. |
[6] |
尹 玉,李小强,李东升,王 亮,翟雨农. 复合材料层合板机械连接研究进展*[J]. 航空制造技术, 2016, 59(11): 72-77. |
[7] |
孙益军,林智育. 含分层损伤复合材料层板压缩分层疲劳扩展研究*[J]. 航空制造技术, 2015, 58(9): 77-81. |
[8] |
王共冬,陈浩,王军. 局部寻优算子库在复合材料层合板强度优化设计中的应用[J]. 航空制造技术, 2015, 58(16): 98-101. |
|
|
|
|