Research on Ultrafast Laser Machining of Film Cooling Hole in Turbine Blade
ZHANG Xiaobing 1, 2 , JI Liang 1 , CAI Min 1 , MAO Zhong 1 , LI Yuancheng 1 , ZHANG Wei 1, 2
1. AVIC Manufacturing Technology Institute, Beijing 100024, China;
2. Science and Technology on Power Beam Processing Laboratory, Beijing 100024, China
Abstract：Making film cooling holes by ultrafast laser in turbine blade of single crystal superalloy to obtain better quality was studied widely at home and abroad. Ultrafast laser drilling research status abroad on making relatively high depth-diameter-ratio was briefly introduced at first. Then the quality of hole’s wall, the relationship between of hole’s depth and efficiency made by ultrafast laser at 2.1ps pulse width, 400μJ pulse energy and experimental results of fatigue life comparison of three groups samples of single crystal superalloy with holes which were made by ms, ns, ps laser separately were presented. The technical research results were described on making film cooling holes in turbine blades with thermal barrier coatings, in double wall blades and processing shaped film cooling holes. Further research focused on putting ultrafast laser drilling technology into production of making film cooling holes in turbine blades was proposed.
张晓兵，纪亮，蔡敏，毛忠，李元成，张伟 . 超快激光加工涡轮叶片气膜冷却孔技术研究[J]. 航空制造技术, 2021, 64(21): 14-22.
ZHANG Xiaobing, JI Liang,CAI Min, MAO Zhong, LI Yuancheng, ZHANG Wei. Research on Ultrafast Laser Machining of Film Cooling Hole in Turbine Blade. Aeronautical Manufacturing Technology, 2021, 64(21): 14-22.
2021, 
