加筋壁板VARI 整体成型工艺设计与验证*

doi:10.16080/j.issn1671-833x.2017.18.083

摘要
参考文献
相关文章 (15)

全文: PDF (4445 KB)
输出: BibTeX | EndNote (RIS)

摘要针对一种典型复合材料加筋壁板，完成模具结构及工艺流程等整体成型工艺设计，同时利用PAM-RTM 软
件完成流道设计优化模拟，并根据模拟结果选择合理的注射方式及流道布局，最终根据所选方案完成工艺试验验证，
对构件进行超声无损检测，检测结果显示构件没有内部缺陷、树脂充分填充，最终验证了加筋壁板整体成型工艺设计
及模拟分析的有效性。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	丛晶洁1
	陈志平1
	2
	胡忠民1

关键词 ：真空辅助树脂渗透成型（VARI）, 加筋壁板, 工艺设计, 流动模拟

Abstract：Based on the characteristics of composite stiffened panels, We develop its process design of VARI integrated
forming technology including the mold and the process steps, and then create some viable flow runner project to
simulate and analysis by PAM-RTM. According to the results, we chosen the project with reasonable injection mode and
flow run-ner to manufacture the stiffened panels by VARI process. the result of the nondestructive testing show that internal
defect barely exists in the component, which proved that the process design and the simulation is effective.

Key words： Vacuum assisted resin infusion(VARI) Stiffened panel Process design Flow simulation

引用本文:

丛晶洁1，陈志平1,2，胡忠民1. 加筋壁板VARI 整体成型工艺设计与验证*[J]. 航空制造技术, 2017, 60(18): 83-87.
CONG Jingjie1, CHEN Zhiping1,2, HU Zhongmin1. Process Design and Verfication of VARI Integrated Forming of Stiffened Panels[J]. Aeronautical Manufacturing Technology, 2017, 60(18): 83-87.

链接本文:

https://www.amte.net.cn/CN/10.16080/j.issn1671-833x.2017.18.083 或 https://www.amte.net.cn/CN/Y2017/V60/I18/83