[1] Clough R W. The finite element method in plane stress analysis//ASCE. Proceedings of the second ASCE conference on electronic computation. ASCE, 1960: 345-350.
[2] 周磊,金建新,周瑞武,等. 飞机蒙皮拉形机数字化控制的研究. 机械工程师,2003,10:28-30.
[3] 李小强,李东升,杜宝瑞,等. 国外航空钣金专用制造技术与装备发展. 航空制造技术,2012(15): 32-37.
[4] 侯红亮,余肖放,曾元松. 国内航空钣金装备技术现状与发展. 航空制造技术,2009(1):34-39.
[5] 张彦敏,周贤宾,罗红宇,等。双曲度飞机蒙皮拉伸成形轨迹优化与验证. 中国机械工程,2006,17(19):2053-2056.
[6] 冯朋晓,李明哲,付文智. 高柔性多夹钳拉形机的结构设计. 锻压装备与制造技术,2010,5:21-24.
[7] Hardt D E, Olsen B A, Allison B T, et al. Sheet metal forming with discrete die surface//Proceedings of the 9th NAMRC. 1981: 140-144.
[8] Papazian J M. Tools of change: Reconfigurable forming dies raise the efficiency of small-lot production. Mechanical Engineering, 2002, 124: 52-55.
[9] Papazian J M, Anagostou E L, Christ R J, et al. Tooling for rapid sheet metal parts production//Proceedings of 6th Joint FAA/DoD/NASA conference on aging aircraft. San Francisco, 2002.
[10] 邹方. 新一代飞机蒙皮拉伸成形柔性多点模具. 航空制造技术,2007(11):30-33.
[11] 张文阳,李东升,李小强,等. 可重构柔性模具蒙皮拉形模面生产方法研究与实现. 锻压技术,2009,34(2):145-158.
[12] 刘纯国,李明哲,隋振.多点技术在飞机板类部件制造中的应用. 塑性工程学报,2008,15(2):109-114.
[13] 刘益成,周贤宾. 蒙皮拉形机构运动分析. 航空制造技术,2004(1):85-88.
[14] 李卫东,万敏,战强,等. 数控蒙皮横拉机运动分析与仿真控制. 北京航空航天大学学报,2004,30(2):105-108.
[15]于成龙,李东升,李小强等. VTL1000型数控蒙皮拉形机运动仿真系统. 计算机集成制造系统,2012,18(1):87-92.
[16] Oding S S. Controlling the formation of double curvature sking elements on a program-controlled stretch former Ⅰ. Soviet Aeronautics (Eenglish translation of Izvesiya VUZ, Aviatsionnaya Tekhnika), 1987, 30(3): 57-61.
本文共有参考文献46篇,因篇幅所限,未能一一列出,如有需要,请向本刊编辑部索取。