[1] Camp D W,Kozlowski M R,Sheehan L M,et al. Subsurface damage and polishing compound affect the 355-nm laser damage threshold of fused silica surfaces. Proceedings of SPIE,1998,3244: 356- 364.
[2] Tian Ailing,Wang Chunhui,Jiang Zhuangde,et al. Study on key algorithm in scanning white-light interferometry. Proc. of SPIE,2008,7155:71552N1-71552N8.
[3] BUIJSM,HOUTENK K V. Three-body abrasion o f brittle materials as studied by lapping . Wear,1993(166):237-245.
[4] 刘德福,段吉安,钟掘. 光纤连接器端面研磨装置运动分析. 光学精密工程,2006,14(2):159-166.
[5] FINE K R,GARBE R,GIP T,et al. Non-destructive,real time direct measurement of subsurface damage.SPIE,2005,5799: 105-110.
[6] Feit M D,Rubenchik A M. Influence of subsurface cracks on laser induced surface damage. Proceedings of SPIE,2004,5273: 264-272.
[7] Kamimura T,Akamatsu S,Yamamot o M,et al. Enhancement of surface damage resistance by removing a subsurface damage in fused silica. Proceedings of SPIE,2004,5273:244-249.
[8] Stolz C J,Menapace J A,Schaff ers K I,et al . Laser damage initiation and growth of antireflection coated S-FAP crystal surfaces prepared by pitch lap and magnetorheological finishing. Proceedings of SPIE,2005,5991: 449- 455.
[9] Mansurov G M,Mamedov R K,Sudarushkin A S,et al. Study of the nature of a polished quart z-glass surface by ellipsometric and SpectroscopicMethods. Optical Spectroscopy,1982,52(5) : 509- 513.
[10] 王卓,吴宇列,戴一帆,等.光学材料研磨亚表面损伤的快速检测及其影响规律.光学精密工程,2008,16(1):16-21.
[11] 石峰,戴一帆,彭小强,等. 磁流变抛光消除磨削亚表面损伤层新工艺.光学精密工程,2010,18(1):162-167.
[12] 李圣怡,王卓,吴宇列,等. 基于研磨加工参数的亚表面损伤预测理论和试验研究.机械工程学报,2009,45(2):192-198.
[13] SHEN J,LIU SH H,YI K,et al. Subsurface damage in optical substrates.Optik,2005,116(6):288-294.
[14] PAPEMORY S,SCHMID A W. Laser-introduced surface damage of optical materials: Absorption sources,initiation,growth,and mitigation.Laser-Induced Damage in Optical Materials. Bellingham,USA:SPIE,2008,7132:7132J1-7132J28.
[15] 张峰,余景池,张学军,等.磁流变抛光技术.光学精密工程,1999,7(5):1-8.
[16] RANDI J A,LAMBROPOULOS J C,JACOBS S D. Subsurface damage in some single crystalline optical materials. Applied tics,2005,44(12): 2241-2249.
[17] 高宏刚. 亚纳米级超光滑表面制造的关键技术研究[D]. 长春: 中国科学院长春光学精密机械研究所,1999.